[audacity4blind] Re: Audacity And How It Plays Audio Tracks

  • From: Ted Galanos <tr.galanos@xxxxxxxxx>
  • To: audacity4blind@xxxxxxxxxxxxx
  • Date: Sat, 5 Sep 2020 09:34:37 -0500

I use an M-Track two channel audio interface. When I bought it about four years 
ago from, I think, Amazon, it was about $100. The two inputs are left and right 
channel, XLR and quarter inch input. it has a left and right channel quarter 
inch output for speakers, but it also will input via USB into the computer. 
There is also a quarter inch headphone jack for monitoring. There is a dial 
volume knob for each of the two channels to control input gain and two volume 
dial for volume output. There is a large dial for master volume output There is 
a toggle switch which will direct the audio out to speakers and or into the 
computer through the USB port.

Ted Galanos
www.GalanosConsulting.com
713-396-3495
Please consider donating to my ABLE account. 
https://www. ablegifting.com/TX/K9L8A2

On Sep 5, 2020, at 7:21 AM, Rick USA <richardrthomas48@xxxxxxxxx> wrote:


Hi:
Thanks for the responses and especially the way Audacity handles passing 
audio to the sound card drivers via wasapi and other hosting software.
There are allot of potential places along the layers of the software chain, 
not to mention firmware and hardware,  where a problem could occur.
First: Is there a way to ensure Audacity is grabbing “Exclusive Use” of the 
Audio System?
Second, does Audacity have a built in, automatic compression setting to limit 
sudden and loud noise from playback or from recording and, if so, where can I 
find these settings?
Finally, since no other programs, apps, are making noise at the same time as 
Audacity when I am recording, I am guessing they are not impacting the 
playback/recording but this is not necessarily the case.
To bypass the software chain layers related to wasapi and the Realtech 
drivers I think the first thing to try after checking for Audacity 
compression and exclusive use settings, is to get an audio input device like 
a Motu, Berringer or FocusRite or something else and use Asio host  to take 
the Microsoft software and Realtech layers out of the audio chain, I think.
I also have found suggestions that dolby and dolby like software can cause a 
problem like I am experiencing due to ducking or audio leveling,  but the 
solutions are messy, don’t seem to often work and esoteric at best so I am 
hoping that an audio interface using its own sound card and hosting software 
may also bypass this type of problem, sigh.
I am going to ask for some ideas about an inexpensive, easy to use, or used,  
audio interface folks are using with Audacity that has an independent sound 
card and its own audio hosting software..
Thanks again for all the help:
Note I am documenting all this in case anyone else runs up against anything 
like this so they wont have to reinvent the wheel as it were.
Rick USA .
 
The audacity4blind web site is at 
//www.freelists.org/webpage/audacity4blind Subscribe and unsubscribe ;
information, message archives, Audacity keyboard commands, and more... To 
unsubscribe from audacity4blind, send an email to 
audacity4blind-request@xxxxxxxxxxxxx with subject line unsubscribe

Other related posts: