Hi Jerome
In addition to Robbie's tips, I add a few. Explore Audacity's menus. A
great deal of what you will need resides there. While there are faster
ways of getting to many of those features, you will get a good feel for
what is available.
And don't forget to read the manual, found under the Help menu. It is
very accessible and detailed. As you progress, ask specific questions
here and people will provide many gems of wisdom.
David on this list has also written material specifically for JAWS users
to which he or someone else may care to point you.
Andrew
On 22/09/2016 9:31 PM, Jerome Thompson wrote:
Hello Robbie!
Thanks for your welcome on board!
Appreciated!
It looks like the instructions that you've provided are going to help me, a lot.
Will let you know how things go.
I am a Novice, regarding my skill set, in respect to using Audacity.
Therefore, I am very inexperience with it. Also, I am teaching
myself. I therefore invite and welcome any help and support you and
others may provide me.
Much Thanks!
You sent out an inquiry about an Audacity Workshop.
In response. The Screen Reader that I use is JAWS.
Wish I could help you more.
Jerome.
On 9/22/16, Robbie <tickleberryfun@xxxxxxxxx> wrote:
Hi Jerome!The audacity4blind web site is at
Welcome on board. There are quite a few on this list who record their own
music, but it’s difficult to give you any pointers, if we don’t know your
skill level or what exactly you would like to do. Just recording a track is
easy. Recording multiple tracks for one song is a bit trickier. Mixing and
mastering is yet another realm. However, here are a few tips to get you
started.
To record from your selected input device, press r, to stop recording press
space. Press space again to hear the recording.
Pressing r will insert a new track for the recorded audio. Pressing r again
will insert another track.
While recording a second track you may want to listen to the first track, in
order to sing or play in sync with it. To do this you need to toggle overdub
on/off by pressing ctrl-shift-o.
If you want to hear yourself while recording, toggle SoftwarePlaythrough
on/off by pressing ctrl-shift-p.
The above commands are all found in the Transport menu. You should
familiarize yourself with it and also check out this Transport menu
tutorial.
http://manual.audacityteam.org/man/transport_menu.html
If you find that the recorded tracks are not in sync, you may have to adjust
the latency setting in Preferences. This can be a tricky thing to get right.
Read up on recording preferences here.
http://manual.audacityteam.org/man/recording_preferences.html
If you would like to insert a click track to help you keep time, You’ll find
that option in the Generate menu. Check out details on generating a click
track here.
http://manual.audacityteam.org/man/click_track.html
Is that enough to get you started? Do write in if you have any further
questions.
Cheers! Robbie
-----Original Message-----
From: audacity4blind-bounce@xxxxxxxxxxxxx
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Jerome Thompson
Sent: Tuesday, September 20, 2016 3:06 PM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: Reading levels in Audacity
Hello all!
I am very new to Audacity, just having started with it, approximately two
weeks back,
I am self-tought.
I have learned how to import and export mp3 files. Can someone kindly
assist me with how to record songs as well as how to create my own CDs, once
I have compiled enough songs?
Thanks!
Jerome.
On 9/20/16, Andrew Downie <access_tech@xxxxxxxxxxxxxx> wrote:
Hi VitorThe audacity4blind web site is at
As well as reading the peak recording level, you can read the peak
playback level. The problem is that you have to play through the
entire track to be sure you have found the peak. My approach (and
others may have more rigorous options) is to:
1. Select the whole track.
2. Open Amplify from the Effects Menu.
3. You will be offered a default value. If it is - say - 5db the
peak is minus 5.
Depending on the consistency of the recording, that may or may not be
very useful. One loud click can make the rest of the track lower than
it would otherwise be. I use Sound Finder in the Analyse Menu (not
its intended purpose) or Peak Finder to track down peaks. It is then
a matter of deciding what to do about them.
Ask further if the above is off the mark.
Andrew
On 20/09/2016 7:57 AM, Vitor Ferreira wrote:
Hello all.
How can i read the peak level of a file in Audacity?
For instance, when i go to the recording control, i can adjust the
level at which my voice or any sound is going into the system.
That's nice and easy.
What i would like to know is the volume level of a file i have
opened, such as a song or a music peace i might import into the project.
The idea is to know exactly the peack level at which the music plays,
and then normalizing and applying the right ammount of compression.
How can we read that? Thank you.
The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives, Audacity
keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives, Audacity keyboard
commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe
The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe
//www.freelists.org/webpage/audacity4blind
Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...
To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe
