Hi Steve, thanks for your reply. No, I’m not using jaws. Are use NVDA and
narrator. Yes Windows 10. I’m assuming the same principles would exist with
these two. I’ll fiddle around and give a try. Thanks for your advice so far.
On 21 Jan 2021, at 6:53 pm, stephen <dmarc-noreply@xxxxxxxxxxxxx> wrote:
Hi Brian,
First I’m assuming you’re using Windows and Jaws. The simplest way is to set
the audio host to Windows Wasapi and the recording device to audio loop-back.
After hitting R the Actual recording begins when sound begins. You can Either
channel Jaws to another sound card if you have some sort of mixing device or as
I do, set everything up to record and use Speech on Demand with Jaws to shut it
up before starting the recording. You can always trim off any speech after the
recording is done. HTH
Steve
From: audacity4blind-bounce@xxxxxxxxxxxxx
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Brian Williams
Sent: Thursday, January 21, 2021 10:40 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Recording from the Internet.
Hi all, I want to record from a stream on the Internet into Audacity. Is this
possible? Is there a setting within Audacity or somewhere within the window
setting that I need to change to enable this?
Brian
