[audacity4blind] Re: recording to the middle of a track

  • From: Steve the Fiddle <stevethefiddle@xxxxxxxxx>
  • To: audacity4blind@xxxxxxxxxxxxx
  • Date: Mon, 17 Jul 2017 08:50:16 +0100

There have been many requests for various types of "punch in"
recording, but I'm not aware of anyone previously asking for
"inserting" the new recording into an existing track. I have added
this feature request to the feature request page of the Audacity wiki.

It occurs to me that there may be a simpler way to do what you want:
1) Turn off "Overdub" in the Transport menu so that you are not
distracted by the other track.
2) Record the new bit onto a new track.
3) Select and cut the new bit
4) Paste it into the original track.
5) (optional) delete the second track (which is now empty).

Steve

On 17 July 2017 at 04:24, Ikrami <blindathlete6@xxxxxxxxx> wrote:

Thank you for the clarifications, I believe I am aware of these techniques, 
but I was just inquiring if there is a direct way to place the cursor in the 
middle of a track and start recording, and have the recorded audio inserted 
at the cursor position without overwriting the rest of the audio. It turns 
out that this feature is not currently implemented in Audacity, but I wander 
if this is intentional to overlook this feature because the developers see 
that it is not important for a multitrack audio editor?


-----Original Message-----
From: audacity4blind-bounce@xxxxxxxxxxxxx 
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Steve the Fiddle
Sent: Monday, July 17, 2017 4:18 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: recording to the middle of a track

If you want to 'replace' part of the first track, you can use "Split Delete" 
to remove that part that you want to replace, then record on the second track 
to fill the gap.

If you want to "insert" new audio, then you need to insert some silence into 
the first track at the point where you wish to insert the new audio. There 
are two ways that you can insert a gap into the first
track:
1) You can place the cursor at the relevant point and then generate some 
silence (from the "Generate" menu).
2) You can place the cursor at the relevant point and then select to the end 
of the track (Shift + End), Cut the selected portion (Ctrl + X), move the 
cursor to the end of the desired gap, and paste (Ctr + V).
After making the gap, record the new part on the second track.

A variation on this second method is to cut the part that you want to be 
after the new material, then record the new material with "Append Record", 
then paste the audio that you cut on the end of the new recording.

Steve

On 17 July 2017 at 01:58, Andrew Downie <access_tech@xxxxxxxxxxxxxx> wrote:
Steve, I think I have missed something.  that doesn't resolve the issue if I 
understand correctly.  Material recorded on the second track is not inserted 
between existing material on the first track, it overlaps.  In fact I get 
the same result whether I use Record or Append Record (r and shift-r 
respectively).


Andrew



-----Original Message-----
From: audacity4blind-bounce@xxxxxxxxxxxxx
[mailto:audacity4blind-bounce@xxxxxxxxxxxxx] On Behalf Of Steve the
Fiddle
Sent: Monday, 17 July 2017 2:07 AM
To: audacity4blind@xxxxxxxxxxxxx
Subject: [audacity4blind] Re: recording to the middle of a track

Rather than recording into the middle of an existing track, create a
new audio track, set the cursor position to where you want recording
to start and record into the new track using "Append Record". On
Export, all tracks are mixed down into a single audio file,

Steve

On 15 July 2017 at 23:35, Robert Hänggi <aarjay.robert@xxxxxxxxx> wrote:
Sorry, but there's no punch-in or record into time selection feature
implemented yet (nor in the next release).

Robert

On 15/07/2017, Ikrami <blindathlete6@xxxxxxxxx> wrote:
Hello,

How can I record Audio the middle of a track in audacity. I know
that I can use the append record feature, shift + r, but this will
insert my recorded audio to the end of the currently focused track.
But what if I want to record some audio at the beginning of it or at
the middle? Is there an easy way to do it, instead of recording to a
new track and then copy paste the new audio to the required position?

Best regards





The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives, Audacity
keyboard commands, and more...

To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe


The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives, Audacity keyboard 
commands, and more...

To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe



The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives, Audacity
keyboard commands, and more...

To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe


The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives, Audacity keyboard 
commands, and more...

To unsubscribe from audacity4blind, send an email to 
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe



The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...

To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe


The audacity4blind web site is at
//www.freelists.org/webpage/audacity4blind

Subscribe and unsubscribe information, message archives,
Audacity keyboard commands, and more...

To unsubscribe from audacity4blind, send an email to
audacity4blind-request@xxxxxxxxxxxxx
with subject line
unsubscribe

Other related posts: