I'm glad that worked, and thanks for your efforts on my book and the
information. I was going to just suggest replacing tabs with something
bookshare's system would recognize and leaving it because I didn't have a
better solution. I am really concerned about tabs not being retained
because that character is very important. I guess I should write to
support about it. I know it's a somewhat separate issue, but it would make
column problems much worse.
Sarah Van Oosterwijck
Assistive Technology Trainer
http://home.earthlink.net/~netentity
----- Original Message -----
From: "Paula and James Muysenberg" <outofsightlife@xxxxxxxxxxx>
To: "Bksvol" <bksvol-discuss@xxxxxxxxxxxxx>
Sent: Saturday, July 30, 2005 12:53 PM
Subject: [bksvol-discuss] Scansoft and decolumnizing.
In case anyone runs into the same problem I mentioned earlier, I
discovered that rescanning with Scansoft decolumnized the index. The only
trouble was that at first, Scansoft was not putting the entries on separate
lines. I went into the Reading settings, and changed the Line Endings
setting, so that they would not be ignored, and that worked.
I hope this might be helpful to anyone who is having trouble getting K1k
to properly recognize columns.
Paula
-- No virus found in this incoming message. Checked by AVG Anti-Virus. Version: 7.0.338 / Virus Database: 267.9.7/60 - Release Date: 7/28/2005