[bksvol-discuss] e: Re: penbook and kurzweil
- From: "Lisa Kidder" <lisakid@xxxxxxxxxxxx>
- To: bksvol-discuss@xxxxxxxxxxxxx
- Date: Fri, 01 Apr 2011 12:07:10 -0500
Yes
----- Original Message -----
From: "Larry Lumpkin" <llumpkin@xxxxxxxxxxxxx
To: <bksvol-discuss@xxxxxxxxxxxxx
Date sent: Fri, 1 Apr 2011 10:07:21 -0500
Subject: [bksvol-discuss] Re: penbook and kurzweil
Do you mean "pearl"? We have both Pearl and kurzweil and find
Kurzweil
often does a better job in producing bookshare-quality books. I
have tried
to shoot books with Pearl and open book and, while the pearl is
very fast, I
have found it very difficult to produce bookshare-quality
material. If you
have openbook 9, the settings out of the box should do fine. As
to the
camera, You might find an 11 inch by 14 inch piece of white
non-reflective
poster board helps if your shooting surface is oak-patterned such
as is
found in some of the particle board computer stands. Try
shooting with and
without camera light and make sure your room lights are on. Be
careful of
your fingers--they are easy to get in the shot.
-----Original Message-----
From: bksvol-discuss-bounce@xxxxxxxxxxxxx
[mailto:bksvol-discuss-bounce@xxxxxxxxxxxxx] On Behalf Of Lisa
Kidder
Sent: Thursday, March 31, 2011 11:28 PM
To: bksvol-discuss@xxxxxxxxxxxxx
Subject: [bksvol-discuss] penbook and kurzweil
I recently received one of the new scanners from Freedom
Scientific, and it
uses Openbook. I have used Kurzweil, but have never used
Openbook. can
someone please tell me what settings I need to set, and if there
is anything
I need to know before submitting a book that I have scanned with
Openbook.
Thanks, Lisa To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get
a list of
available commands, put the word 'help' by itself in the subject
line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get
a list of available commands, put the word 'help' by itself in
the subject line.
To unsubscribe from this list send a blank Email to
bksvol-discuss-request@xxxxxxxxxxxxx
put the word 'unsubscribe' by itself in the subject line. To get a list of
available commands, put the word 'help' by itself in the subject line.
Other related posts:
- » [bksvol-discuss] e: Re: penbook and kurzweil - Lisa Kidder
