[ddots-l] Behringer BCF2000 and Sonar Guide
- From: Chris Smart <csmart8@xxxxxxxxx>
- To: midimag@xxxxxxxxxxx
- Date: Sat, 28 Jan 2012 12:47:28 -0500
Hi folks.
Ok, after some proofreading and discussion with Tim Burgess -
thanks Tim! - our guide to using the BCF2000 control surface with
Sonar is ready for release.
Some of the terminology has changed between this and the previous
version, so those of you who have the previous version, revision 4,
should grab this new one.
If you have a BCF2000 but have not delved too deeply into what you
can actually control with it, or are just intimidated by the whole
thing, this guide is for you.
If you are thinking about buying a BCF2000 for use with Sonar, but
are not sure what you can or cannot control with the unit, read
this guide.
Feel free to redistribute this guide. All I ask is that you don't
go changing it. If you have any corrections or comments to it,
please contact me at csmart8@xxxxxxxxxx
Here's a Dropbox link to grab the guide as an RTF file. The link
will not be available indefinitely:
http://tinyurl.com/7weckup
Chris
--------------------------------------------------
CTS MASTERING: PROFESSIONAL MIXING AND MASTERING!
http://www.ctsmastering.com
Dropbox: Have your stuff when you need it. 2GB is free
http://db.tt/bQ2GuIt
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
- » [ddots-l] Behringer BCF2000 and Sonar Guide - Chris Smart
