[ddots-l] Clearing Selections in Sound Forge
- From: "Peter Donahue" <pdonahue1@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 15 Feb 2010 17:12:04 -0600
Hello everyone,
The one thing I haven't figured out how to do without moving to the
beginning or to the end of files in Sound Forge or closing the program and
reopening it to deselect a region or chunk of a file to reset these
positions is how to clear selected file areas. To select a file region or
chunk in Sound Forge one must press the letter "I" to begin the selection
and the letter "O" to terminate it. If before you perform an operation on
the selected region or chunk you decide to change the beginning or
termination points of the selection you should be able to enter a command to
deselect it and reset the start and end points of the selection. Can one
tell me how to do this without having to go through the nonsense I described
above? That will save me much time and frustration when resetting start and
end points of a selected file region or chunk. I use Sound Forge 55 and
Audio Studio 8. Thanks for your help.
Peter Donahue
----- Original Message -----
From: "Dennis Madsen" <dennis.madsen@xxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, February 15, 2010 4:21 PM
Subject: [ddots-l] SV: Re: Sonar and Soundforge meters
Hi just turn one off them down. If it does not clic it was the other
channal. Have not tryied it but it must work, i think!
Take care
Dennis
-----Oprindelig meddelelse-----
Fra: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] På
vegne af neville
Sendt: 15. februar 2010 23:08
Til: ddots-l@xxxxxxxxxxxxx
Emne: [ddots-l] Re: Sonar and Soundforge meters
I know that f11 reads the left and f12 reads the right
In soundforge What I want to know is how can I read both of them in Sonar
and if the channel that Sonar is reading does not clip but the other channel
clips then how would you know for sure if your track is clipping until you
play it in sound forge?
May the peace of God which passes all understanding gard your heart and
mind in Christ Jesus.
God bless you!
Website http://www.nevillepeter.com
email neville@xxxxxxxxxxxxxxxx
phone 407-222-4488
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Dave Carlson
Sent: Monday, February 15, 2010 4:51 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Sonar and Soundforge meters
Mike,
Are you referring to F12 and F11 in Sonar, or Sound forge?
Dave
----- Original Message -----
From: "Mike Christer" <m-christer@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, February 15, 2010 13:25
Subject: [ddots-l] Re: Sonar and Soundforge meters
F12 reads the right, and F11 the left...
l8r
Mike
----- Original Message -----
From: "neville" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, February 15, 2010 8:25 PM
Subject: [ddots-l] Sonar and Soundforge meters
> In Sonar, f2 reads the meter for the master buss, but which channel is it.
> In Soundforge we can read both the left and right channels.
> I was working on something and in Sonar the master buss meter read -1.2 DB
> but in Soundforge the left meter read -0.6. So then is it safe to assume
> that f2 always reads the right channel?
>
> What if one channel clips but the other one doesn't can pressing f2 report
> this accurately?
>
>
> May the peace of God which passes all understanding gard your heart and
> mind in Christ Jesus.
>
> God bless you!
>
> Website http://www.nevillepeter.com
>
> email neville@xxxxxxxxxxxxxxxx
>
> phone 407-222-4488
>
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
- » [ddots-l] Clearing Selections in Sound Forge - Peter Donahue
