Hello: You're better off just calling them for an activation code. Gord----- Original Message ----- From: "James Malone" <malone_j@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Thursday, January 04, 2007 7:52 PM Subject: [ddots-l] Re: Configuring TranzPort
Sorry about that.It looks like Activate was the wrong page, so go to Freedom Scientifics siteand follow the links to the Activate page under support. -----Original Message-----From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] OnBehalf Of James Malone Sent: Thursday, January 04, 2007 4:47 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Configuring TranzPort Just as long as you let SF know about the problem, They will reset your count. Go to http://www.activate.com. Fill out the form, you will be notified within 24 hours. James -----Original Message-----From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] OnBehalf Of William R. McCann Sent: Thursday, January 04, 2007 3:06 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Configuring TranzPortOK, Wolfgang, the only thing you can do is reboot your machine or unload and restart JAWS. Either way, JAWS will ask you to activate your unit of JAWS.For some reason, JAWS decides that your copy is not activated after you install a device like the TranzPort. The people at Freedom Scientific are aware of this problem but have not yet released a solution for it. Best, Bill -----Original Message-----From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] OnBehalf Of Wolfgang Angermann Sent: Thursday, January 04, 2007 1:54 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Configuring TranzPortThank you, Bill, that was indeed what I did not have in my instructions. Nowthe TranzPort is there. However, my Jaws 7.1 prompts as unauthorized, and,unfortunately, I send my authorization key without success. In adition, whenI return to the pc keyboard and use the arrow keys, CT5 tells me that i'musing an unauthorized version of CT. For today I've lost my humor to work onthat. Maybe, when I come back tomorrow, there's some good advice? Wolfgang ----- Original Message ----- From: "William R. McCann" <BillList1@xxxxxxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Thursday, January 04, 2007 3:22 PM Subject: [ddots-l] Re: Configuring TranzPortDear Wolfgang, Perhaps you received an incorrect version of our instructions. I'll paste in the revised section below. Our original instructions did not include the important information in section 1.2. ... Configuring TranzPort 1.1. Run SONAR and choose Options | MIDI (ALT+O, M). Check the TranzPort entry in both the input and output list. 1.2. Now choose Options | Control Surface (ALT+O, C). Tab to the "Add a Control Surface" button and press ENTER. If Frontier TranzPort is not the highlighted entry in your list, arrow down to select the Frontier TranzPort entry. Now tab and make sure that the TranzPort is highlighted in both the input and output list. Press OK to add the TranzPort and then the Close button of the Control Surfaces dialog. 2. Following applies only to customers who have successfully installed CakeTalking for SONAR 5: Press F6 to refresh the screen. Press F4 to open the Track Pane Options. Choose option 1: Open a list of Control Surfaces so You can choose one to use. After pressing ENTER, Choose your TranzPort Control Surface from the list, Then press ENTER to Return to the Track Pane. 3. Press F4 to open the Track Pane Options. Choose option 2: Make JAWS Speak Changes You Make On Your External Control Surface. After Pressing Enter, This Setting Will Be Enabled. But It Will Be Disabled Whenever you return to using your PC keyboard. -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Wolfgang Angermann Sent: Thursday, January 04, 2007 8:26 AM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Configuring TranzPort Hello: although I have successfully performed the TranzPort installation from the DD instructions, and although I performed the steps to confugure it, I don't find the TranzPort listed in the control surfaces of my track options. In that list there are just the 4 Sonar Jaws surfaces. I've successfully installed sonar 5 and CT5. TranzPort is also selected among the midi inputs and outputs. I'd be happy about any help. Thank You! Wolfgang ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq