[ddots-l] Re: Delta 1010 help
- From: "Johanna Herranen" <johanna.herranen@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 5 Aug 2010 17:43:39 +0300
Hi Dave,
Unfortunately I could not find the old one I used, so I went to m-audio website
trying to find something from there. I found
something which I tried ... Do I still have hope to downgrade successfully if /
when I find my old drivers?
Thanks for helping!
Johanna
----- Original Message -----
From: "Farfar Carlson" <dgcarlson@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, August 05, 2010 5:34 PM
Subject: [ddots-l] Re: Delta 1010 help
You're saying that the Delta 1010 driver you installed is a new one, and not
the original one you had previously?
You may be able to find older drivers on the web. I know that for my Delta
44 I have been religiously protecting my original CD with the drivers, since
that version of the control panel works quite well with JAWS, and later
versions hardly at all.
Also I've not been able to find the mixer settings files I've created for my
Delta 44. I don't know how the settings are being stored, but it doesn't
appear to be a separate file.
Good luck.
Dave
----- Original Message -----
From: "Johanna Herranen" <johanna.herranen@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Thursday, August 05, 2010 07:29
Subject: [ddots-l] Delta 1010 help
Hi all,
I'm sure this topic has been discussed here before, but I am in great need
of help. My dear old Sonar computer died - and there is
no way back. So finally I'm forced to upgrade my Sonar from version 4 to
version 8; now that I anyway have to start over, I can as
well start using something a bit more up-to-date *smile .
But... first of all: I installed Delta 1010
driver. All my mixer settings seem to be lost. I copied the Jaws scripts I
used from an old harddrive, but the ddriver is new and
does not seem to work. I only can see the tab names, nothing else. All I get
out of the card is silence.
Now I'm wondering is there somewhere a newer script for Delta drivers, or is
there somewhere an older driver which I could try at
least so that I could set up my card the way it was? I'm using Windows XP
sp3 / Jaws 11.
Or, does anyone know if the mixer settings had been stored somewhere so that
I could
just go to my old harddrive and copy some magic file from place A to place B
and then it works again...? For a long time my computer
just worked, I had no need to fight with software ... and now I should start
hunting all the drivers, patches for Sonar, etc ...
etc... I would prefer just making music, not fighting with technical
problems. Any help is greatly appreciated.
Thanks,
Johanna
--
Johanna Herranen
http://www.mikseri.net/johannah
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
--------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 9.0.851 / Virus Database: 271.1.1/3052 - Release Date: 08/05/10
09:35:00
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
