[ddots-l] Re: Dimension Pro Reverb is where?
- From: Stacy Blackwell <stacy.blackwell@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Fri, 27 Feb 2009 10:04:09 -0600
I got it! The problem was that when I was inside the Element 1 Mix or some
other page, I was using Control-F4 and Alt F4 to get out of the dialog after
altering some settings. This was totally shutting down the volume of the synth
by turning the element off. The next time I turned the element on I pressed
Escape and things worked well. I hope this might help someone else who might
be having the same problem.
But I still cannot figure out where to go to turn the reverb on for MIDI tracks
assigned to TTS-1 outputs 2, 3, and 4. Does this require HSC? I know the
TTS-1 is an old synth, but this is baffling me. Any reply would be
appreciated.
Thanks.
S.B.
From: stacy.blackwell@xxxxxxxxxxx
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Dimension Pro Reverb is where?
Date: Thu, 26 Feb 2009 20:28:00 -0600
David, I missread your comment. I tried to press the application key on the
actual reverb column on the MIDI track, and of course, it doesn't do anything.
I then went to the FX bin on the MIDI track and saw the MIDI FX for the first
time (I'll have to try these out sometime.) I realized that you meant for me
to do what I was already doing and that was inserting a reverb into the FX Bin
of the Output track of that DP instance.
I then did the Control-y thingee on the MIDI track, pressed F4, and went
through some of these options again. I went to the Gobal Reverb Mix option and
selected Hall one more time. This time I waited and tabbed and wound up on a
set of edit boxes. I eventually ran across Reverb Gain. It was at 33% I
belive and I increased it greatly. For a moment I had reverb. The thunder
crashed so I shut everything down. Look like it's going to take another day.
Sorry for the long explanation, but I felt I needed to explain myself. Did any
of this make sense?
I'm going to read now about HSC. I read about it when I first got my system
but was reluctant when I was not sure of how it worked. Let me know more when
you get time. thanks.
> Date: Fri, 27 Feb 2009 00:50:10 +0000
> Subject: [ddots-l] Re: Dimension Pro Reverb is where?
> From: onlineeagle@xxxxxxxxxxxxxx
> To: ddots-l@xxxxxxxxxxxxx
>
> Firstly, good luck. Secondly, you’re giving yourself a hard time by
> not installing HSC. If you’re using JSonar then the sets get installed
> automatically. You need to download the hotspot clicker program first,
> which you can do at
> www.hotspotclicker.org
> From there you can download the latest build of hotspot clicker- build 193.
>
> When you’ve done that, assuming you manage to do that OK, we’ll move
> on to the next steps which are very easy.
>
>
> On 26/02/2009, Stacy Blackwell <stacy.blackwell@xxxxxxxxxxx> wrote:
> >
> > David, thanks for replying. I was beginning to think my post didn't matter.
> > I do not have HSC but have thought about getting it for V-Vocal maybe.
> > Does it work really well? And no, I didn't know about the pressing of the
> > application key on the reverb column. I'll try that tonight. See? I said
> > that the answer was probably simple. I hope that is the problem because I'd
> > like to hear what the reverb sounds like with DP instead of having to send
> > the output to a reverb bus every time. Wish me luck!
> >
> > S.B.
> >
> >> Date: Thu, 26 Feb 2009 16:01:37 +0000
> >> Subject: [ddots-l] Re: Dimension Pro Reverb is where?
> >> From: onlineeagle@xxxxxxxxxxxxxx
> >> To: ddots-l@xxxxxxxxxxxxx
> >>
> >> Hi, no one seems to have replied so I’ll give it a go. Are you using
> >> Hotspot Clicker and the dimension Pro HSC set? You can alter wet and
> >> dry mix from there I think. Also, have you tried pressing the
> >> applications key on the reverb column on the dimension pro main output
> >> track strip and checking that the control isn’t disabled? If none of
> >> this helps then I’ll go and have a look in the next couple of days.
> >> I’ve never needed to adjust reverb on dimension yet.
> >>
> >>
> >>
> >> On 25/02/2009, Stacy Blackwell <stacy.blackwell@xxxxxxxxxxx> wrote:
> >> >
> >> > Hello again. I told you guys I would be back with more stupid questions.
> >> > Yes, I know that most questions aren't stupid, but I've been reluctant
> >> > to
> >> > post due to the possible answer's simplicity.
> >> >
> >> >
> >> >
> >> > Ok, the MIDI Reverb column in the trac pane (Sonar 7) doesn't control
> >> > anything in my Dimension Pro. I have gone to the DP Options and found
> >> > Global Reverb Mix and selected "Hall", and I have assigned most reverb
> >> > controls of DP in the Synth Rack, but these don't appear to be doing
> >> > anything either. I cannot find where to turn the reverb on. I visited
> >> > one
> >> > element and decided I'd best get out of there, being that I'm still new
> >> > and
> >> > don't quite understand them yet. Can someone assist me here?
> >> >
> >> >
> >> >
> >> > I also now recall that on the TTS-1 output 1, the MIDI Tracks assigned
> >> > to
> >> > that output can have their reverb/chorus changed in the track pane
> >> > columns.
> >> > But I recall that different tracks assigned o outputs 2, 3, and 4 would
> >> > not
> >> > work. I guess this is similar to the Dimension Pro issue. Or maybe not.
> >> > Can you guys assist here?
> >> >
> >> >
> >> >
> >> > I'd like to say that I've enjoyed reading all these posts even though
> >> > most
> >> > are over my head ----I just act like I understand it all when my wife
> >> > asks
> >> > me what I'm listening to. (grin). I have also enjoyed listening to
> >> > others'
> >> > projects. Gotta go!
> >> >
> >> > S.B.
> >> >
> >> > _________________________________________________________________
> >> > It’s the same Hotmail®. If by “same” you mean up to 70% faster.
> >> > http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_AE_Same_022009
> >>
> >>
> >> --
> >> http://www.theyounguns.co.uk
> >>
> >> http://www.myspace.com/davideagleradio
> >> PLEASE READ THIS FOOTER AT LEAST ONCE!
> >> To leave the list, click on the immediately following link:
> >> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
> >> If this link doesn't work then send a message to:
> >> ddots-l-request@xxxxxxxxxxxxx
> >> and in the Subject line type
> >> unsubscribe
> >> For other list commands such as vacation mode,
> >> click on the immediately following link:
> >> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
> >> send a message, to
> >> ddots-l-request@xxxxxxxxxxxxx
> >> and in the Subject line type
> >> faq
> >>
> >
> > _________________________________________________________________
> > Access your email online and on the go with Windows Live Hotmail.
> > http://windowslive.com/online/hotmail?ocid=TXT_TAGLM_WL_HM_AE_Access_022009
>
>
> --
> http://www.theyounguns.co.uk
>
> http://www.myspace.com/davideagleradio
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subjectúq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
Windows Live™ Hotmail®…more than just e-mail. See how it works.
_________________________________________________________________
Windows Live™: Discover 10 secrets about the new Windows Live.
http://windowslive.com/connect/post/jamiethomson.spaces.live.com-Blog-cns!550F681DAD532637!7540.entry?ocid=TXT_TAGLM_WL_t2_ugc_post_022009
Other related posts:
