[ddots-l] Re: Fw: Re: Fw: [midi-mag] crackling when recording a second track in sonar
- From: "John Fioravanti, Jr., Esquire" <fioresq1@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 8 May 2006 14:29:23 -0400
Phil: I assume this disk buffer is the same as DMA buffer size. Thanks for
that response. John
----- Original Message -----
From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, May 08, 2006 2:04 PM
Subject: [ddots-l] Re: Fw: Re: Fw: [midi-mag] crackling when recording a
second track in sonar
> I have my disk buffers in the audio options dialog box, set to 128 and my
ASIO buffers set to 256
> or, 512.
>
> Regards, Phil Muir
>
> P J Muir Productions, Music and audio production,
> Mixing, Mastering: www.philmuir.com/
>
> ----- Original Message -----
> From: "John Fioravanti, Jr., Esquire" <fioresq1@xxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Monday, May 08, 2006 6:42 PM
> Subject: [ddots-l] Fw: Re: Fw: [midi-mag] crackling when recording a
second track in sonar
>
>
> >
> > ----- Original Message -----
> > From: "Fioravanti & Knight" <fioravantiknight@xxxxxxxxxxx>
> > To: <fioresq1@xxxxxxxxxxx>
> > Sent: Monday, May 08, 2006 12:14 PM
> > Subject: Re: [ddots-l] Re: Fw: [midi-mag] crackling when recording a
second
> > track in sonar
> >
> >
> >> As per everyones' helpful suggestions, I upgraded to Sonar 4.04 and
Jaws
> >> 6.2. Unfortunately, Iam still having difficulties. Essentially for
now,
> > my
> >> question is where do most of you keep your I/O buffers set. I am using
> > asio
> >> drivers and have my dma buffers at about 384
> >> ----- Original Message -----
> >> From: <fioresq1@xxxxxxxxxxx>
> >> To: <ddots-l@xxxxxxxxxxxxx>
> >> Cc: <fioravantiknight@xxxxxxxxxxx>
> >> Sent: Thursday, May 04, 2006 8:34 AM
> >> Subject: Re: [ddots-l] Re: Fw: [midi-mag] crackling when recording a
> > second
> >> track in sonar
> >>
> >>
> >> > Jaws 6.0 a delta 66 spects are attached in the estimate I'm not
running
> > a
> >> > control surface and I've tried without jaws, this happens in the
second
> > or
> >> > subsequent track
> >> > ----- Original Message -----
> >> > From: "hf" <neep23@xxxxxxxxxx>
> >> > To: <ddots-l@xxxxxxxxxxxxx>
> >> > Sent: Thursday, May 04, 2006 8:26 AM
> >> > Subject: [ddots-l] Re: Fw: [midi-mag] crackling when recording a
second
> >> > track in sonar
> >> >
> >> >
> >> > > Hi John
> >> > > A couple of things. Restate again what your pc specs are. What
version
> >> of
> >> > > Jaws are you running?
> >> > > What sound card?
> >> > > Are you using a control surface and is it up to the latest driver?
> >> > >
> >> > > And of course just for giggles, try recording without jaws
running.
> >> > > Just curious...
> >> > > HF
> >> > > ----- Original Message -----
> >> > > From: <fioresq1@xxxxxxxxxxx>
> >> > > To: <ddots-l@xxxxxxxxxxxxx>
> >> > > Sent: Wednesday, May 03, 2006 11:48 PM
> >> > > Subject: [ddots-l] Re: Fw: [midi-mag] crackling when recording a
> > second
> >> > > track in sonar
> >> > >
> >> > >
> >> > > > Hello: well I thought I had the problem solved with Sonar; I
diabled
> >> the
> >> > > > onboard soundcard, disabled all items in the start menu, and
turned
> >> > > > everything off in the background. When I recorded a second track
> > last
> >> > > > week
> >> > > > I heard no crackling. However, when I went back on for the first
> > time
> >> > > > since
> >> > > > then, and played the file, I heard crackling. I changed the
buffer
> >> size
> >> > > > again and it was fine. I restarted, heard the crackling again in
> > play
> >> > > > back,
> >> > > > changed the buffer size, (either up or down), itdoesn't much
> > matter),
> >> > and
> >> > > > the crackling stops. In short, every time I restart, there's the
> >> > > > crackling
> >> > > > until I move the buffer size. Does this give anyone some ideas
as
> > to
> >> > the
> >> > > > source of the problem? John
> >> > > >
> >> > > > ** To leave the list, click on the immediately-following link:-
> >> > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> > > > ** If this link doesn't work then send a message to:
> >> > > > ** ddots-l-request@xxxxxxxxxxxxx
> >> > > > ** and in the Subject line type
> >> > > > ** unsubscribe
> >> > > > ** For other list commands such as vacation mode, click on the
> >> > > > ** immediately-following link:-
> >> > > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> > > > ** or send a message, to
> >> > > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >> > > >
> >> > >
> >> > > ** To leave the list, click on the immediately-following link:-
> >> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> > > ** If this link doesn't work then send a message to:
> >> > > ** ddots-l-request@xxxxxxxxxxxxx
> >> > > ** and in the Subject line type
> >> > > ** unsubscribe
> >> > > ** For other list commands such as vacation mode, click on the
> >> > > ** immediately-following link:-
> >> > > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> > > ** or send a message, to
> >> > > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >> > >
> >> >
> >>
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
>
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
