Brian, Here are the instructions, in a message from Dan. Dave Created in the Audio Recording and Mixing Studios, San Jose, California ----- Original Message ----- From: "Dan Rugman" <sib-access@xxxxxxxxxxxxxxxxx> To: <sib-access@xxxxxxxxxxxxx> Sent: Saturday, July 10, 2010 11:25 Subject: [sib-access] Re: The alt+ctrl+down problem Parham, It's important that you test the other Ctrl+Alt+Arrow keystrokes because Ctrl+Alt+Down restores the screen to its correct position. So, if you're only trying that keystroke, you won't see anything happening on screen. If you try Ctrl+Alt+Up however, the screen will turn up-side-down, which will be an obvious giveaway. You may also find that JAWS stops reading list views correctly if the screen has been rotated. The options to double-check are in a dialog that you reach through the desktop. These instructions are for systems with the Intel graphics chips usually found in Del machines. Press Windows+M to minimize all apps and go to the desktop. Then press Ctrl+Space until JAWS says that the item your on is not selected. Now press the applications key to bring up the desktops context menu. You should find an option called graphics. This will open the graphics card applet which contains some options for disabling the rotation shortcut keys. Hope this helps. Dan Rugman Visit www.musicaccess.co.uk for visually-impaired musicians and home of Sibelius Access -----Original Message----- From: sib-access-bounce@xxxxxxxxxxxxx [mailto:sib-access-bounce@xxxxxxxxxxxxx] On Behalf Of Parham Doustdar Sent: 10 July 2010 19:08 To: sib-access@xxxxxxxxxxxxx Subject: [sib-access] The alt+ctrl+down problem Hello, Yes, I do have a sighted brother that can help me with this. And, I was the one that had the graphic card problem previously, and I've double-checked, it's as it should be. Thanks! If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx If you wish to unsubscribe, send a blank message with the single word, unsubscribe - in the Subject line to: sib-access-request@xxxxxxxxxxxxx PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq