[ddots-l] Re: How do I adjust the volume of the metronome?
- From: "Shawn Brock" <shawnbrock@xxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 17 Jun 2006 11:51:48 -0400
sorry i told you audio it shood hav ben project. my mind is not working yet.
so the same instructions apply except press alt, o then p.
Shawn Brock
Cincinnati Sound Lab
130 East Sixth Street
Cincinnati Oh.
45202
Phone: 513-349-8541
Web Site:
www.cincysoundlab.com
----- Original Message -----
From: DJX
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, June 17, 2006 4:40 AM
Subject: [ddots-l] Re: How do I adjust the volume of the metronome?
did you try in the project options under metronome or tempo, the second tab,
theres a setting for port, recording, playback all that, you can also set a
valume for the note that metronome plays, velosity. try lowering that and see
if it works; there might be 2 of them, if you have it set to accent the first
note on the beat, so you'll have to adjust volumes for both the accent note and
the regular (3 beats) note. I'm sure its somewhere in that tab, close to the
end, after the port, you can specify the note and then the velosity.
HTH, DJX
------------------------------------------------------------------------------
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Raymond
Sent: Friday, June 16, 2006 8:22 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] How do I adjust the volume of the metronome?
Hi,
(If you don't want to read this rather long e-mail, the subject says it all.)
This will be a dumb question. I've finally got the thing to be a little more
responsive when I play. It's still not satisfactory but I think I'll fix it.
Anyway, here's another problem. This is kind of long.
I'm using a four-channel mixer. I'm very disappointed on how things go when I
record, because the track volume has to be boosted up to 110 or so just to hear
it over that loud metronome. I can take controll of the gain of channel 2 on
the mixer, which is the channel in which I plugged this into. I can also
control the gain of all the output - all the four channels at once. I had the
gain for channel 2 almost the whole way up so turning the master gain just a
little made it almost too loud. I turned the gain down for channel 2 then
messed with the master volume. I'm still not comfortable with setting my track
volume that high unless that's the way it's supposed to be. If there's a way,
how can I adjust the metronome volume?
Thanks,
Raymond
Other related posts:
