[ddots-l] Re: Inquiry: CT selection issues
- From: Bobbi Blood <phantomess666@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 12 Jun 2012 08:47:44 -0600
Hey list,
Thanks for the tips regarding my previous inquiry about selection in CT. They
were very helpful. Even if I can't use the so-called "conventional" methods
within CT, I still have other options available which appear to work very
nicely. Thanks again for all the suggestions and tips!
Most Sincerely,
Bobbi
From: D!J!X!
Sent: Monday, June 11, 2012 9:26 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Inquiry: CT selection issues
Hi, isn't the keyboard shortcut for selecting with CT ctrl+enter? Or is that
what you meant?
To select with the comma key, you can use shift plus comma or ctrl+comma for
multiple track selection, if ct didn't change that default sonar behaviour.
HTH, D!J!X!
--------------------------------------------------------------------------------
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Bobbi Blood
Sent: Monday, June 11, 2012 11:17 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Inquiry: CT selection issues
Hello List,
Recently someone posted about how they were having issues opening/closing the
clips pane. Along with that they mentioned having issues with selection. They
later posted that said issues got resolved. To whomever was talking about this
particular issue, how did you manage to solve the selection problems?
I too am having selection issues. I can select any or all tracks with
alt+enter from start to end. However, when selecting a portion of a track by
setting from/through times and using ctrl+enter, CT will report that the
portion was selected. But when I double check the status, it turns out that
start to end was selected, and not the portion I'd set. The "Select by time
dialogue" fails to work also, which is rather odd. If I attempt to use it for
a selection, nothing at all gets selected. Will it hurt to find and try to
install the patches even though Sonar reports that I'm running 8.5.3? I have a
workaround for this issue... I can use the comma hotkey to select one track at
a time, but this is a bit tedious when trying to select more than one track at
a time for editing purposes.
Before anyone asks, I've double checked my windows settings and they are all
correct, save for the resolution which currently stands at 1280 by 768. From
an earlier post of Brian's, it appears that the resolution will work out just
fine so long as the bottom number of the resolution is at 768.
Before Sonar 8.5.3, I had installed Sonar 7, which I ended up removing
completely before installing 8.5.3. I'm using JAWS 10 and Windows Vista 64
bit. I installed the 64 bit version of Sonar. Everything except selection is
working flawlessly. I would attempt to re-install CT but the person who posted
about this earlier said that it didn't solve the problem. Any suggestions are
appreciated.
Thanks for reading!
Most Sincerely,
Bobbi
Other related posts:
