Yup, that should do it! Regards, Phil Muir Accessibility Training Telephone: US (615) 713-2021 UK +44-1747-821-794 Mobile: UK +44-7968-136-246 E-mail: info@xxxxxxxxxxxxxxxxxxxxxxxxxxx URL: http://www.accessibilitytraining.co.uk/ -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Tim Burgess Sent: 12 July 2010 15:11 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Issue with Sound and Superior Drummer Hi Darren, OK, try this: 1 - Insert the track template into a new project and make sure it plays properly; 2 - Go into SD2 and save your current setup as a project and/or combined preset; 3 - Go into one of the old projects that won't play; 4 - Load the SD2 project/preset settings you saved earlier and test. Best wishes. Tim Burgess Raised Bar Ltd Phone: +44 (0)1827 719822 Don't forget to vote for improved access to music and music technology at http://www.raisedbar.net/petition.htm -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Darren H Sent: 12 July 2010 13:52 To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: Issue with Sound and Superior Drummer Hi. This is getting odder and odder. I deleted the superior tracks in the currentproject and it went back to being fine. As soon as I inserted the track template I was using before, it went all odd again. But, if I insert the same track template into a new project, it works great. Cheers Darren ----- Original Message ----- From: "Jack Conti" <jackconti@xxxxxxx> To: <ddots-l@xxxxxxxxxxxxx> Sent: Monday, July 12, 2010 1:19 PM Subject: [ddots-l] Re: Issue with Sound and Superior Drummer > Darren i am as far from a genius as possible but just wondering if there > may be a sonar issue perhaps? > Does this happen with every old project you load using sd? do you have > anything using session drummer 2 or 3? > > just a thought? > At 07:54 AM 7/12/2010, you wrote: >>Hi Phil. >> >>Authorization is fine. >> >>This isn't happening if I start a new project, only for existing ones. >> >>I wondered if it were a memory issue, but even freezing tracks doesn't fix >>it. >> >>It's not just the superior that get disabled, all tracks are not heard at >>all. >> >>It is almost as if pressing play switches to a new sound card, but I don't >>have two with this system. >> >>This is really puzzling. >> >>Cheers >>Darren >> >>If you like electronic, ambient, new age or atmospheric music, become a >>fan of The Karmistry Project on Facebook... >>http://facebook.karmistryproject.com >> >>You can also follow Karmistry Media on Twitter... >>http://www.twitter.com/Karmistrymedia >> >>----- Original Message ----- From: "Phil Muir" >><info@xxxxxxxxxxxxxxxxxxxxxxxxxxx> >>To: <ddots-l@xxxxxxxxxxxxx> >>Sent: Monday, July 12, 2010 12:17 PM >>Subject: [ddots-l] Re: Issue with Sound and Superior Drummer >> >> >>>Darren, I wonder if Superior Drummer has become unauthorised? This can >>>happen if something has changed on you're system in the hardware. It's >>>easy >>>to check if Superior Drummer 2 isn't authorised. Just look in the >>>plug-in >>>window with the Jaws cursor. >>> >>>Regards, Phil Muir >>>Accessibility Training >>>Telephone: US (615) 713-2021 >>>UK +44-1747-821-794 >>>Mobile: UK +44-7968-136-246 >>>E-mail: >>>info@xxxxxxxxxxxxxxxxxxxxxxxxxxx >>><mailto:info@xxxxxxxxxxxxxxxxxxxxxxxxxxx> >>>URL: >>>http://www.accessibilitytraining.co.uk/ >>>-----Original Message----- >>>From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] >>>On >>>Behalf Of Darren H >>>Sent: 12 July 2010 11:48 >>>To: Dancing Dots List >>>Subject: [ddots-l] Issue with Sound and Superior Drummer >>> >>>Hi all. >>> >>>I've got a really odd issue that I'll try and explain as best I can. >>> >>>Everything in sonar 8.5 is working fine. >>> >>>However, since this morning, when I load anything that uses Superior >>>Drummer >>>2.1 the project doesn't play at all and the sound of the card alters so >>>that >>>jaws sounds all boxy and distorted. >>> >>>I've reinstalled Superior 2.1 but it's still the same. >>> >>>This is not happening with anything that doesn't use Superior. >>> >>>I'm not sure what I should be checking for. >>>All the inputs/outputs are exactly the same as before. >>> >>>If I turn the engine off, Jaws reverts back to normal sound, but >>>switching >>>it back on again take it back to its boxy and distorbed sound. >>> >>>Very frustrating. >>> >>>Any ideas? >>> >>>Cheers >>>Darren >>> >>>If you like electronic, ambient, new age or atmospheric music, become a >>>fan >>>of The Karmistry Project on Facebook... >>>http://facebook.karmistryproject.com >>> >>>You can also follow Karmistry Media on Twitter... >>>http://www.twitter.com/Karmistrymedia >>> >>> >>>PLEASE READ THIS FOOTER AT LEAST ONCE! >>>To leave the list, click on the immediately following link: >>>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>If this link doesn't work then send a message to: >>>ddots-l-request@xxxxxxxxxxxxx >>>and in the Subject line type >>>unsubscribe >>>For other list commands such as vacation mode, click on the immediately >>>following link: >>>ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to >>>ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq >>> >>> >>>PLEASE READ THIS FOOTER AT LEAST ONCE! >>>To leave the list, click on the immediately following link: >>>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>If this link doesn't work then send a message to: >>>ddots-l-request@xxxxxxxxxxxxx >>>and in the Subject line type >>>unsubscribe >>>For other list commands such as vacation mode, >>>click on the immediately following link: >>>ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>send a message, to >>>ddots-l-request@xxxxxxxxxxxxx >>>and in the Subject line type >>>faq >> >>PLEASE READ THIS FOOTER AT LEAST ONCE! >>To leave the list, click on the immediately following link: >>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>If this link doesn't work then send a message to: >>ddots-l-request@xxxxxxxxxxxxx >>and in the Subject line type >>unsubscribe >>For other list commands such as vacation mode, click on the immediately >>following link: >>ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>send a message, to ddots-l-request@xxxxxxxxxxxxx >>and in the Subject line type >>faq > > > PLEASE READ THIS FOOTER AT LEAST ONCE! > To leave the list, click on the immediately following link: > ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe > If this link doesn't work then send a message to: > ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > unsubscribe > For other list commands such as vacation mode, click on the immediately > following link: > ddots-l-request@xxxxxxxxxxxxx?subject=faq or > send a message, to ddots-l-request@xxxxxxxxxxxxx > and in the Subject line type > faq > PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq