If it was project specific then it's likely that something had gone wrong
with that particular project file.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of robert hall
Sent: 10 March 2016 22:05
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Latency issues
Yeah, I know: but, for that particular project, nothing else would so I used
it as a work-around.
The world and people are more beautiful when viewed from the inside. Visit
my site at: truecutproductions.com
On Mar 10, 2016, at 3:54 PM, Phil Muir <info@xxxxxxxxxxxxxxxxxxxxxxxxxxx>wrote:
On
Ehh, you shouldn't have to do that :-)
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Behalf Of robert hallbut,
Sent: 10 March 2016 21:45
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Latency issues
Hello, I have not been following this thread either from the beginning
from my past experience with this type of Latency issue. Make sure all FXthat
Bins are in by-pass mode. I found that that solved my delay issue. Try
and see if that works for you. Robert AKA: Robbie Lee.I
The world and people are more beautiful when viewed from the inside. Visit
my site at: truecutproductions.com
On Mar 10, 2016, at 1:35 PM, Bill <billlist1@xxxxxxxxxxx> wrote:Richard off-list to request a time for us to connect by phone and JAWS
Thanks to everybody who has chimed in on this thread. I have written to
Tandem. Since I have a Quad-Capture that works with virtually 0 latency,
will compare my settings for the unit with his and make any changesAs
required. I will also compare our settings under SONAR's Audio options.
far as I know, Richard is running with ASIO as his driver mode which iswhat
I use too.your
On Behalf Of floyd white
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]
Sent: Thursday, March 10, 2016 11:05 AMsilly question, but, when you arm a track in Sonar are you making sure
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Latency issues
Richard,
I haven't been following this thread from the beginning and this may be a
echo input is NOT on.PLEASE READ THIS FOOTER AT LEAST ONCE!
sync.
control + A both arms and sets echo on. You don't need nor want that
Thanks,
Floyd...
On 3/10/16, Richard Moore <Richard.moore@xxxxxxxxxxxxxxxxxxxxxxx> wrote:
Hi there
The operating system is Windows 7 and the latency problem is a delay.
At the moment for example it is difficult to play electric guitar with
the drum track as I am hearing the guitar after I strum it. I tried
turning down the guitar on the Quad Capture so I wouldn't hear it
through the monitor. This made it easier to play along with the drum
track but when I listened bac to the recording it was completely out of
following link:PLEASE READ THIS FOOTER AT LEAST ONCE!
I had the same problem when tapping in the drum track using my midi
keyboard but was able to quantize that.
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Phil Muir
Sent: 09 March 2016 22:51
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Latency issues
Hey Richard. Can you please be a wee bit more specific? E.G. which
opperating system are you currently using and exactly what kind of
latency issues are you expeerencing? E.G. pops, crackles, drop outs
or, some kind of delay? You probably have done all of this however, do
you have all of the latest drivers installed for that sound card? Was
on the phone today with a client here in the UK and found that we had
the latency slider set a wee bit lower than we should have so we were
getting a little crackeling but no dropouts. All sorted out now and he
is running a fantastic purpose built PC
:-)
On 9 March 2016 22:27:24 GMT+00:00, Richard Moore
<Richard.moore@xxxxxxxxxxxxxxxxxxxxxxx<mailto:Richard.moore@childrenin
crossfire.org>>
wrote:
Hi
New user of Sonar with caketalk. Having latency problems with both
midi and audio tracks. Using roland quad capture, intel I7 laptop
6700hq cpu@2.6ghz<mailto:cpu@2.6ghz> with 8gb ram
'It is up to each of us to make the best use of our time to help
create a happier and fairer world.' Children in Crossfire's Patron,
His Holiness the 14th Dalai Lama.
Richard Moore
Executive Director
Children in Crossfire
'Giving Children the Chance to Choose'
http://www.childrenincrossfire.org<http://www.childrenincrossfire.org/
http://www.richardmoore.ie<http://www.richardmoore.ie/>
2 St. Joseph's Avenue
Derry/Londonderry
BT48 6 TH
Direct Line: 02871 278942
--
Regards,
Accessibility Training
Telephone: UK +44-1747-228-459
Mobile: UK +44-7968-136-246
E-mail:
info@xxxxxxxxxxxxxxxxxxxxxxxxxxx<mailto:info@xxxxxxxxxxxxxxxxxxxxxxxx.
uk>
URL:
http://www.accessibilitytraining.co.uk
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
ddots-l-request@xxxxxxxxxxxxx?subject q or send a message, toddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject?q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq