Thanks Darren. I loaded the cwb file in to Sonar and on this end all tracks are in sync. I don't know what could have caused this problem About the distortion track. Would lowering the volume level for all the traks solve the distortion ? I know that the leed vocal and harmony vocal was recorded at the same level. Then the levels were turn down to mix. The leed vocal was just a little below 0. The vocal harmony is quite of bit lower than the leed. I can't wait to hear what you will be able to do with it. Again thanks. Mark At 05:24 AM 8/4/2009 +0100, you wrote: >Hi mark. > >Just a quick update. >i've got your files and unbundled them, but there seems to be an issue with >the main vocal not synching with the rest of the project. > >As soon as I can solve that, I can get to work. >Incidentally, the distortion is on the entire lead vocal track. It's not so >bad that I can't mask it and I'll be adding some extra tracks in due course. > >Cheers >Darren > > >----- Original Message ----- >From: "Mark Dew" <jmkeybd1@xxxxxxxxxxx> >To: <ddots-l@xxxxxxxxxxxxx> >Sent: Tuesday, August 04, 2009 3:57 AM >Subject: [ddots-l] Re: Looking for advice my file > > >> >> Thanks steve, I tried one of the pop protectors on my sm58. >> It seemed to me it really affected the highs. >> Maybe this can be adjust with e q. >> Tell me more about the Shure Beta 87A mic. >> I was thinking that I needed a better mic for recording. >> I've used the sm58 for years on the job but this is different while >> recording. >> So any suggestion on different mics would be helpful. >> >> Mark >> >> At 12:33 AM 8/4/2009 +0100, you wrote: >>>Hi Mark, >>> >>>The Shure 58 is a nice microphone, maybe you just need a pop shield to >>>help >>>stop the P's and B's. >>> >>>Just a thought, the next time you are at a music store, ask if they have a >>>Shure Beta 87A microphone that you may try. I believe it would really suit >>>your rich textured voice as they are so clear sounding. >>> >>>They are a condenser Microphone so need phantom power either from your >>>mixer >>>or external sound card. >>> >>>Steve W >>> >>>----- Original Message ----- >>>From: "Mark Dew" <jmkeybd1@xxxxxxxxxxx> >>>To: <ddots-l@xxxxxxxxxxxxx> >>>Sent: Sunday, August 02, 2009 1:09 PM >>>Subject: [ddots-l] Re: Looking for advice my file >>> >>> >>>> >>>> Steve, thanks for the info. >>>> Compression is something I've been thinking about. >>>> One of my problems is understanding the various settings and what they >>>> mean. >>>> Presets, that's sounds like the ticket for me. >>>> Maybe I'll try sending all the tracks to a master track and give a shot >>>> at >>>> compressing that track. >>>> If anyone knows of a good article on the web, about this subject I would >>>> be >>>> interrested in reading it. >>>> As far as the distorted vocal track, I muted the track and I can not >>>> hear >>>> it. >>>> I listened to it on speakers and headset. >>>> However, I have notice my shure-58 seems to be a little hard to work >>>> with. >>>> One thing I noticed is I have to be careful of words starting with the >>>> letter b and p. >>>> I get somewhat of a popping sound. >>>> I'm wondering if this is what Darren is catching. >>>> Maybe its just the 57 years of life is catching up with me. >>>> I have the greatest respect for the members of this group and it is >>>> important to hear different points of view. >>>> >>>> Mark >>>> >>>> At 10:41 AM 8/2/2009 +0100, you wrote: >>>>>Hi Mark, >>>>> >>>>>First off, I think you have a lovely voice, you really capture the easy >>>>>relaxed warm feeling that the likes of Jim Reaves had. >>>>> >>>>>I listened to it on speakers and headset. >>>> is much better than me at picking up distorted tracks, I didn't >>>>>notice it but if Darren heard it, it's there. >>>>> >>>>>You asked about Compression, well, it may help enhance your tracks. >>>>> >>>>>I've only been using Sonar for a little while, but I have noticed a vast >>>>>difference to my tracks now that I have access to compressors. >>>>> >>>>>I used to shy away from Compressors, however, I've just started >>>>>experimenting by applying Compression from the Sonitus:fx to different >>>>>instruments. >>>>>The Sonitus:fx has preset examples to choose from, it's very user >>>>>friendly >>>>>and the examples are very good. >>>>> >>>>>As for the music you record, my next project is to use Sonar to try and >>>>>recreate the sound of 1950's Rock 'N' Roll. >>>>> >>>>>As the englishman once said, "One does what one can with what one has." >>>>> >>>>>Steve W >>>>> >>>>>----- Original Message ----- >>>>>From: "Mark Dew" <jmkeybd1@xxxxxxxxxxx> >>>>>To: <ddots-l@xxxxxxxxxxxxx> >>>>>Cc: <jmkeybd1@xxxxxxxxxxx> >>>>>Sent: Saturday, August 01, 2009 5:36 PM >>>>>Subject: [ddots-l] Looking for advice my file >>>>> >>>>> >>>>>> Hello group. >>>>>> I actually got through my first project using Sonar producer 8. >>>>>> Quite different from, Sonar 2.0. >>>>>> I still have a few things to learn but I'm not doing too bad. >>>>>> However, if some of you would like to listen to the song, here is the >>>>>> link. >>>>>> >>>>>> http://www.markdew.com/music/blizard.m3u >>>>>> >>>>>> I realize I'm probably one of the oldest members of the group. >>>>>> I mostly, do old and new country music, jazz, blues and old standards. >>>>>> So I don't know if you younger folks would care for my music. >>>>>> What I would like to hear from you folks who care to take a listen is, >>>>>> what >>>>>> do you think of the mix? >>>>>> Do you think that compression would help the file? >>>>>> Anything else you might think of. >>>>>> On the file I used five audio tracks. >>>>>> Equipment used Yamaha p90 digital piano, Roland fantom x7 keyboard, >>>>>> Alesis >>>>>> SR16 drum machine and the Roland PK5 bass pedals. >>>>>> I also did the leed and harmony vocals. >>>>>> I'm not looking for praise, but advice on how to improve the file. >>>>>> I do have one question. >>>>>> What is the difference between volume control and volume trim control >>>>>> on >>>>>> a >>>>>> track? >>>>>> Thanks in advance. >>>>>> >>>>>> Mark >>>>>> >>>>>> PLEASE READ THIS FOOTER AT LEAST ONCE! >>>>>> To leave the list, click on the immediately following link: >>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>>>> If this link doesn't work then send a message to: >>>>>> ddots-l-request@xxxxxxxxxxxxx >>>>>> and in the Subject line type >>>>>> unsubscribe >>>>>> For other list commands such as vacation mode, >>>>>> click on the immediately following link: >>>>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>>>> send a message, to >>>>>> ddots-l-request@xxxxxxxxxxxxx >>>>>> and in the Subject line type >>>>>> faq >>>>>> >>>>>> >>>>> >>>>> >>>>>PLEASE READ THIS FOOTER AT LEAST ONCE! >>>>>To leave the list, click on the immediately following link: >>>>>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>>>If this link doesn't work then send a message to: >>>>>ddots-l-request@xxxxxxxxxxxxx >>>>>and in the Subject line type >>>>>unsubscribe >>>>>For other list commands such as vacation mode, >>>>>click on the immediately following link: >>>>>ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>>>send a message, to >>>>>ddots-l-request@xxxxxxxxxxxxx >>>>>and in the Subject line type >>>>>faq >>>>> >>>>> >>>> PLEASE READ THIS FOOTER AT LEAST ONCE! >>>> To leave the list, click on the immediately following link: >>>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>> If this link doesn't work then send a message to: >>>> ddots-l-request@xxxxxxxxxxxxx >>>> and in the Subject line type >>>> unsubscribe >>>> For other list commands such as vacation mode, >>>> click on the immediately following link: >>>> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>> send a message, to >>>> ddots-l-request@xxxxxxxxxxxxx >>>> and in the Subject line type >>>> faq >>>> >>>> >>> >>> >>>PLEASE READ THIS FOOTER AT LEAST ONCE! >>>To leave the list, click on the immediately following link: >>>ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >>>If this link doesn't work then send a message to: >>>ddots-l-request@xxxxxxxxxxxxx >>>and in the Subject line type >>>unsubscribe >>>For other list commands such as vacation mode, >>>click on the immediately following link: >>>ddots-l-request@xxxxxxxxxxxxx?subject=faq or >>>send a message, to >>>ddots-l-request@xxxxxxxxxxxxx >>>and in the Subject line type >>>faq >>> >>> >> PLEASE READ THIS FOOTER AT LEAST ONCE! >> To leave the list, click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >> If this link doesn't work then send a message to: >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> unsubscribe >> For other list commands such as vacation mode, >> click on the immediately following link: >> ddots-l-request@xxxxxxxxxxxxx?subject=faq or >> send a message, to >> ddots-l-request@xxxxxxxxxxxxx >> and in the Subject line type >> faq >> > >PLEASE READ THIS FOOTER AT LEAST ONCE! >To leave the list, click on the immediately following link: >ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe >If this link doesn't work then send a message to: >ddots-l-request@xxxxxxxxxxxxx >and in the Subject line type >unsubscribe >For other list commands such as vacation mode, >click on the immediately following link: >ddots-l-request@xxxxxxxxxxxxx?subject=faq or >send a message, to >ddots-l-request@xxxxxxxxxxxxx >and in the Subject line type >faq > > PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq