[ddots-l] Re: Mackie Display Reader
- From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 26 Jul 2010 14:29:49 +0100
Absolutely - it's what the program was specifically written for. Some test
users have tried it with other surfaces that implement the Mackie Control
Protocol, such as the Behringer BCF2000. This seems to work as well as the
hardware's implementation of the protocol will allow. In practise, the
BCF2000 works very well, as it doesn't do anything silly with the button
presses - the only limitations are imposed by the relatively small number of
buttons when compared to a real Mackie unit (though there are a lot of
combination presses, so it's a lot more capable than it might first appear).
Some very early builds were tested with the Tascam US2400 and there were
issues because this surface sends multiple mode button codes for each button
press, so the output was a little messy - I'm waiting to hear how the latest
build performs.
Best wishes.
Tim Burgess
Raised Bar Ltd
Phone: +44 (0)1827 719822
Don't forget to vote for improved access to music and music technology at
http://www.raisedbar.net/petition.htm
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Scott Lawlor
Sent: 26 July 2010 13:00
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Mackie Display Reader
Hi.
Will this display reader work with the Mackie Control Universal Pro?
----- Original Message -----
From: "Tim Burgess" <tim@xxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, July 26, 2010 6:50 AM
Subject: [ddots-l] Mackie Display Reader
> Hi,
>
> Some of you may already have seen this on MIDI-Mag, so apologies for any
> duplication. I now have an initial version of this tool to make
> Mackie-compliant control surfaces talk. You can read about it and
> download
> the free version from:
>
> http://www.raisedbar.net/mdr.htm
>
> Best wishes.
>
> Tim Burgess
> Raised Bar Ltd
> Phone: +44 (0)1827 719822
>
> Don't forget to vote for improved access to music and music technology at
>
> http://www.raisedbar.net/petition.htm
>
>
>
>
> PLEASE READ THIS FOOTER AT LEAST ONCE!
> To leave the list, click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
> If this link doesn't work then send a message to:
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> unsubscribe
> For other list commands such as vacation mode,
> click on the immediately following link:
> ddots-l-request@xxxxxxxxxxxxx?subject=faq or
> send a message, to
> ddots-l-request@xxxxxxxxxxxxx
> and in the Subject line type
> faq
>
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
