Hi, it's Annabelle. When I make an .sfz file, there's one thing that really confuses me. When I want to define a pitch bend range, I want to be able to have the instrument bend even when there's only two pitch wheel commands on one note. In other words, I don't want to hear just the two resultant notes, but I would actually want to hear a smooth glide from the start note to the end note. How would I define that for the pitch wheel in the .sfz file? What do I do next? Here are some audio examples of the pitch bend wheel problems I'm having. I'll be sending these via the Cakewalk Dropbox. The first one is what I don't want to hear, which is the notes without a smooth bend. The second one is the notes I do want to hear, with a smooth bend. The third is the MIDI file which is the source of the pitch bend commands. The one without a smooth bend was made with Cakewalk TTS1, the one with the smooth bend was made with a third party set of samples within Kontakt 4. By the way, The MIDI file was first notated in Sibelius 5, then exported as a Standard MIDI Type 1 file, and then imported into Sonar. Look carefully at the pitch wheel commands, and tell me if there's something I might be doing wrong.