[ddots-l] Re: Question about Sonar Track Inspector
- From: "Gordon Kent" <dbmusic@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 11 Feb 2012 09:51:29 -0500
Berhane:
Did you set autotune to actually be a soft synth rather than an audio
effect? this is really the way you'll want to use it especially if you want
to control it through midi messages. In the plug-ins utility, select vst as
the category and you should see autotune listed there. Highlight it and go
over to the plug-in properties field and open that dialog. You'll want to
check the "use as synthesizer" option. Press Ok and exit out of the
plug-ins utility. The next time you start sonar, you should see autotune
listed under your soft synths instead of the audio effects. When you insert
it, it will appear as an available midi port where you can assign a midi
track. If you look at the documentation, it should have a table of all the
available midi controllers and what parameters they control, which is really
the best way for us to use autotune.
Hth
Gord
-----Original Message-----
From: Berhane Kidane
Sent: Saturday, February 11, 2012 6:25 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Question about Sonar Track Inspector
Hi guys. I have never been successful to use the Antares auto-tune vocal
pitch correcter. I cannot get how to do the retune and other features of the
auto-tune in track inspector. Any idea?
Thank you.
----- Original Message -----
From: "Rui Vilarinho" <ruialby@xxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, February 11, 2012 6:11 AM
Subject: [ddots-l] Re: Question about Sonar Track Inspector
Hi,
The Cake Talking tutorial advice that you display only some controls. For
example, on equalizer it's adviced that you only display one band eq, so
that you can have access to some Fx controls also. So, this way you will
find only 4 Fx controls. To access some more controls , press the
aplication key in any of the Fx controls and with arrows middle keys go to
assign new controls and choose any with enter.
Try it!
best regards,
Rui Vilarinho
----- Original Message -----
From: "Haipeng Hu" <hhpcomposer@xxxxxxxxx>
To: "midimag" <midimag@xxxxxxxxxxx>; "ddots-l" <ddots-l@xxxxxxxxxxxxx>
Sent: Saturday, February 11, 2012 10:50 AM
Subject: [ddots-l] Question about Sonar Track Inspector
Hello,
I use Sonar 8.5.3 and Jsonar. According to the Jsonar tips and
tracks, I can find some controls of patched fx's in the inspector. But
it seems that the amount of displayed controls is limited. For
example, I patched VSL equalizer (the same with other plugins), a
5-band eq, only the first band controls are displayed. How to let the
inspector display more controls? This plugin is not accessible, so
track inspector is of very important use to me.
Regards
Haipeng
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
