Hi Darren! I also has combined tracks, so i went back and did it all from the top again. It had lost the marking of the tracks. so now it is possible to convert to mp3 from the projekt with out changing anything. Thanks, and sorry for the confusion! dennis _____ Fra: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] På vegne af Darren H Sendt: 26. april 2010 15:27 Til: ddots-l@xxxxxxxxxxxxx Emne: [ddots-l] Re: SV: Re: SV: Re: bounce to track Ah, gotchya. Sorry, all my midi tracks when loaded in already have associated audio tracks so I'm able to export straight away. Haven't does bouncing for a while so I'd need to muck about with it for a while. Cheers Darren ----- Original Message ----- From: Dennis Madsen <mailto:dennis.madsen@xxxxxxxxxxxx> To: ddots-l@xxxxxxxxxxxxx Sent: Monday, April 26, 2010 2:22 PM Subject: [ddots-l] SV: Re: SV: Re: bounce to track Hi Daren! Yes But i get the message to converd to audiotracks. Dennis _____ Fra: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] På vegne af Darren H Sendt: 26. april 2010 15:13 Til: ddots-l@xxxxxxxxxxxxx Emne: [ddots-l] Re: SV: Re: bounce to track Hi Dennis. If you have the encoder installed already, it would be simpler just to export the entire mix to an mp3 file. Then you have no unnecessary tracks tacking up your interface. Cheers Darren If you like electronic, ambient, new age or atmospheric music, become a fan of The Karmistry Project on Facebook... http://facebook.karmistryproject.com You can also follow Karmistry Media on Twitter... http://www.twitter.com/Karmistrymedia ----- Original Message ----- From: Dennis Madsen <mailto:dennis.madsen@xxxxxxxxxxxx> To: ddots-l@xxxxxxxxxxxxx Sent: Monday, April 26, 2010 2:10 PM Subject: [ddots-l] SV: Re: bounce to track Hi Darren! I have installed the incoder. So the only problem is to do it the best way as i am going back to working in the project again after exporting to mp3 format. Is it possible to work in a projekt you have bounced to one track exept for e q in the strip. Like unfrease or somthing? Dennis _____ Fra: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] På vegne af Darren H Sendt: 26. april 2010 14:56 Til: ddots-l@xxxxxxxxxxxxx Emne: [ddots-l] Re: bounce to track You could export the entire mix as .wav and convert to mp3 if you don't have the encoder already enabled in Sonar. Cheers Darren ----- Original Message ----- From: Dennis Madsen <mailto:dennis.madsen@xxxxxxxxxxxx> To: Dot listen <mailto:ddots-l@xxxxxxxxxxxxx> Sent: Monday, April 26, 2010 1:46 PM Subject: [ddots-l] bounce to track Hi all! I am working with a singer on a project. I have made the backing and need to send the project to her for comments. She is not a Sonar user so i have to send it in a mp3 format. If i use the bounce to track command is it than possible to get back to working in the projekct afterwards. or is there a better way to export the file? take care! Dennis