As long as you aren’t using a USB interface that requires alot of bandwidth, an
external should be ok.
Regards, DJX
________________________________
From: ddots-l-bounce@xxxxxxxxxxxxx on behalf of Fran franks
<fm.guitarlady@xxxxxxxxx>
Sent: Tuesday, October 30, 2018 5:53 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Storage expansion
Thank you guys for all those options to consider. I think my resources and
current skill set force me to go with the external drive. Sweetwater has the
Glyph Atom 2TB SSD, and I have their credit card. This is what I'm hoping will
be sufficient, although it has a slightly slower data transfer rate than the
Samsung t5.
I will be upgrading my K11 to K12 and moving all the samples to the new drive.
This leaves my Toontrack samples and Sonar projects on the internal 1TB drive.
This is my hope for the system anyway.
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Phil Muir
Sent: Tuesday, October 30, 2018 11:02 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Storage expansion
Well I wouldn't have thought you would need a rade drive. You could get a
Samsung T3 1 terabyte or a T5 although you could probably save money by getting
a Samsung EVO and stick that in a USB3 caddy. You will save money by going the
Samsung EVO over the T3 or T5. Using a T3 here with Superior Drummer 2 on it
and also writing to the drive. It is faster with regard to load times of
samples etc but I would say that it's about a third faster than my 7200RPM
Seagate sata III drive in a USB3 caddy that uses the Uasp hardware that Windows
10 is enabled to use. Windows 7 does not support the use of newer technologies
such as UASP or other newer technologies such as NVME.
On 30 October 2018 17:32:10 GMT, Fran franks <fm.guitarlady@xxxxxxxxx> wrote:
I just got the Native Instruments Komplete 12 Ultra collector’s edition, and my
1TB internal audio SSD does not have enough room to upgrade from Komplete Ultra
11. I received a suggestion to get a 2TB USB 3.0 SSD, and I’m unclear if I need
the faster data transfer rate in a RAID drive, or the slightly cheaper non-RAID
model with half the speed would be sufficient to run this software with Sonar.
Could someone point me in the right direction?
--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject�q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
