[ddots-l] Re: TC helicon Voiceworks Plus versus the VL2
- From: "Darren H" <darren@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 26 Apr 2010 10:26:50 +0100
Hi Bryan.
Sounds good.
Does it retain the modelling features from the Voiceworks Plus, along with
the vibrato functions and that extra twiddley stuff.
Cheers
Darren
If you like electronic, ambient, new age or atmospheric music, become a fan
of The Karmistry Project on Facebook...
http://facebook.karmistryproject.com
You can also follow Karmistry Media on Twitter...
http://www.twitter.com/Karmistrymedia
----- Original Message -----
From: "Bryan Smart" <bryansmart@xxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Monday, April 26, 2010 9:48 AM
Subject: [ddots-l] Re: TC helicon Voiceworks Plus versus the VL2
The VoiceWorks stuff are the older units.
VoiceLive2
* Doubles the harmonizer from 4 to 8 voices
* Adds choir thickening effect and other humanization features to make
voices not sound synthetic
* Has a separate doubler/virtual vocal layering feature that can simulate
another 4 voices and run at the same time as the 8 voice harmonizer
* Has higher quality delay and reverb effects
* Includes a modulation effect (chorus/flanger/phaser/etc)
* Contains pitch correction/hard-tune features in many places (on the input,
for each harmonizer and doubler voice, in the effects block, etc), instead
of the simple pitch-correct in the older units.
* Can listen to music and figure out harmonies automatically, instead of
making you set a fixed scale or play with a keyboard, though you can still
do that if you want.
* Has better tools for cleaning up your mic input: eq, compressor, de-esser,
and gate. Older ones had simple compressor and gate only.
* Has a feature to automatically setup all of the input effects if you don't
know how to set them yourself.
* Has a separate guitar input with dedicated compressor, eq, mod, delay, and
reverb effects.
There is other stuff. Its significantly upgraded, though.
Bryan
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Darren H
Sent: Monday, April 26, 2010 4:10 AM
To: Dancing Dots List
Subject: [ddots-l] TC helicon Voiceworks Plus versus the VL2
Hi folks.
I've be reading up on both of these products, but can't really get my head
around which is better or what the actual difference is.
Could the Voicewowrks Plus be said to be the studeo rack version of the VL2?
Basically, I'd be using it for studio work only, no live work at all.
Cheers
Darren
If you like electronic, ambient, new age or atmospheric music, become a fan
of The Karmistry Project on Facebook...
http://facebook.karmistryproject.com
You can also follow Karmistry Media on Twitter...
http://www.twitter.com/Karmistrymedia
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
