[ddots-l] Re: TTS1

  • From: Richard Moore <Richard.moore@xxxxxxxxxxxxxxxxxxxxxxx>
  • To: "ddots-l@xxxxxxxxxxxxx" <ddots-l@xxxxxxxxxxxxx>
  • Date: Tue, 14 Feb 2017 08:29:04 +0000

Hi

Thanks for the feedback.  Spoke to Bill last night and tried “shift Z” it 
sorted the problem.  Feel a bit stupid but there you go!  Thanks for the help.

From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Mike Ciarciello
Sent: 13 February 2017 20:06
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: TTS1

If you're having trouble locating the local off menu then another solution 
would be to simply turn down the master volume of your keyboard this usually 
helps too.
However in most cases you do need to go and turn the local to off

Sent from my iPhone

On Feb 13, 2017, at 2:42 PM, BillList1 
<billlist1@xxxxxxxxxxx<mailto:billlist1@xxxxxxxxxxx>> wrote:
Hi, Richard,

Glad to see you are still going strong with CakeTalking and SONAR.

It may be that you need to send what is called a “local-off” message to your 
keyboard.  If your keyboard makes sounds of its own when not connected to a PC, 
you will want to set local off when triggering soft synthes using SONAR.

Again, from what you describe, I think that is the solution.

If your keyboard is powered up and attached to your PC before you launch SONAR, 
it may be smart enough to receive and process a local-off message that SONAR 
sends to it on start up.  If not, you will need to consult the user manual of 
your particular keyboard to learn the keystrokes required to set local off 
mode.  These are keystrokes you make on the musical keyboard itself, not on 
your PC keyboard.  You should find it under the section of the user manual 
dedicated to its MIDI implementation.

HTH,
Bill


From: ddots-l-bounce@xxxxxxxxxxxxx<mailto:ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Richard Moore
Sent: Monday, February 13, 2017 5:02 AM
To: ddots-l@xxxxxxxxxxxxx<mailto:ddots-l@xxxxxxxxxxxxx>
Subject: [ddots-l] TTS1

Hi all

A wee bit of a problem and would welcome any help.

My soft synth is TTS1.  Was putting down a drum track with no problems.  Wanted 
to change to piano on a different track.  The sound changes but the drums still 
remain as well.  No matter what instrument I pick when I go to play a note with 
the piano sound for example it is mixed in with the relevant drum or percussion 
instrument as well.

Any advice?

‘It is up to each of us to make the best use of our time to help create a 
happier and fairer world.’  Children in Crossfire’s Patron, His Holiness the 
14th Dalai Lama.

Richard Moore
Executive Director

Children in Crossfire
'Giving Children the Chance to Choose'

http://www.childrenincrossfire.org<http://www.childrenincrossfire.org/>
http://www.richardmoore.ie<http://www.richardmoore.ie/>

2 St. Joseph's Avenue
Derry/Londonderry
BT48 6 TH
Direct Line: 02871 278942

Other related posts: