Hi Christopher and all, Yes right, thats what I want to do. In the Radium manual they are talking about kays witch have funktions like welocity or have numbers. I dont know where to find then. I was able to find out where the following are: Pitch Bend Wheel, Modulation Wheel, eight Controller Sliders (but I don't know witch controller has witch number), eight Controller Knobs (the same applays to the controller knops I know where they are but not witch or if they have a number), Octave Up & Octave Down Buttons: I know where they are Data Entry Slider: I know where it is, too MIDI/SELECT button: Here I am absolutely not sure where it is!! The only knop that is left is the one under the little display. I also don't understand the explanation they give for that knop. It seems that by pressing that knop other kays become other things but where they are I have no idear. For example the "velocity key" and the "CC No. key " If there is a learning mode on Sonar to find out where this kays are that would be great. Can you tell me how to turn it on? Regards, Patrick Schuppe -----Ursprungliche Nachricht----- Von: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]Im Auftrag von Christopher Bartlett Gesendet: Sonntag, 28. Oktober 2007 01:56 An: ddots-l@xxxxxxxxxxxxx Betreff: [ddots-l] Re: AW: Re: Who of you has the Radium 61 midi kayboard? I have experience with using the midi-learn feature of Sonar to attach knobs and sliders on the Radium to midi-controllable parameters in Sonar. I know that the Radium comes with a set of defaults which I've gotten to work when I didn't expect to, and don't know how to access systematically. Are you looking for the specific procedure to match a slider on the radium to a control parameter in Sonar? Christopher Bartlett At 01:25 PM 10/27/2007, you wrote: >Hi Christopher , >Thanks a lot for answering me!:-) >My speciffic question is: >How can I assigen different funktions to the knops and sliders? Whats the >procedure for that? In other words witch knops on the Radium 61 do I need to >press? >Its to assigen real efekts like ekko or reverb or fade in / outs and so on. >Later on I also need to control appegiators with the radium because its an >midi controler it should be no problem. > >I hope you can help me. thanks a lot!! > >Regards, >Patrick Schuppe > > >-----Ursprungliche Nachricht----- >Von: ddots-l-bounce@xxxxxxxxxxxxx >[mailto:ddots-l-bounce@xxxxxxxxxxxxx]Im Auftrag von Christopher Bartlett >Gesendet: Samstag, 27. Oktober 2007 21:32 >An: ddots-l@xxxxxxxxxxxxx >Betreff: [ddots-l] Re: Who of you has the Radium 61 midi kayboard? > > >I have the Radium 49. What are your specific questions? > > Christopher Bartlett >At 05:26 AM 10/27/2007, you wrote: > >Hi all, > >I am looking for someone who has the M-audio Radium 61 Midi kayboard. > > > >I have the M-audio Radium 61 as a midi kayboard here, too. > >I never worked with this funktions but now that I am on training to learn > >Sonar and ct it also would be > >great to know how I can assigen funktions like echo and other stuff to the > >knops and sliders on the Radium 61 ? Witch knops do I need to press and > >where > >are they? > >Whats the exact procedure for this to work correctly? > >It would be great if someone who has a radium 61 or 49 (its the same just > >with 61 kays) can jump in here and give me tipps. > >thanks a lot, > >Best regards, > >Patrick Schuppe > > > >** To leave the list, click on the immediately-following link:- > >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] > >** If this link doesn't work then send a message to: > >** ddots-l-request@xxxxxxxxxxxxx > >** and in the Subject line type > >** unsubscribe > >** For other list commands such as vacation mode, click on the > >** immediately-following link:- > >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] > >** or send a message, to > >** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > >** To leave the list, click on the immediately-following link:- >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >** If this link doesn't work then send a message to: >** ddots-l-request@xxxxxxxxxxxxx >** and in the Subject line type >** unsubscribe >** For other list commands such as vacation mode, click on the >** immediately-following link:- >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >** or send a message, to >** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq > > >** To leave the list, click on the immediately-following link:- >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] >** If this link doesn't work then send a message to: >** ddots-l-request@xxxxxxxxxxxxx >** and in the Subject line type >** unsubscribe >** For other list commands such as vacation mode, click on the >** immediately-following link:- >** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] >** or send a message, to >** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq