[ddots-l] Re: can you mute one sound on a track whilst leaving the other sounds? - what I think about it and a nice idea for using siedechains.
- From: Drachenkind <drachenkind@xxxxxxxxxxxxxxxxxxx>
- To: ddots-l@xxxxxxxxxxxxx
- Date: Sat, 21 Mar 2009 12:22:24 +0100
Hi Stacy.
I would prefer the other way you told us.
placing the drums on different tracks.
so you can make different mix parameters like EQ or reverb for each track.
By the way, because I am talking about different drums on different
tracks, I just remember a think wich I never tested but perhaps it
really works.
In a german home recording forum I just read the following.
Well my english is bad but I try to tell it as good I can ok?
imagine you have a snare and wwant to have more snare-sound on it.
create a track with a white noise.
put a gate on it and connect a send of the snare drum to the whitenoise
tracks sidechain of the gate.
so you only hear the white noise when the gate is oben.
and the gate opens when the sound comes through the sidechain.
change eq or what ever you want, the gate parameters, mix it to your
snare and it sounds more snare like, you hear the snaring of the snare.
- you know it.
Never tryed it out but it was in an article about sidechains.
I would post it, but it is german.
if here are germans or people who understand look at
www.homerecording.de
Well when I understand it right you can do the same procedure with a
basedrum.
then you need a low frequency sine wave on the gated track.
never tryed it but I would like to.
regards, Robert.
Stacy Bleeks schrieb:
I have a track with kick drum and snare, claps and high hats. Is it
possible to mute the kick drum or should I have put the kick on one
track, the high hats on another track, the snare on another separate
track, and the claps on another track for more control over each sound?
I used the roland Groove soft synth 909 kit.
Thanks,
Stacy
------------------------------------------------------------------------
Eingehende eMail ist virenfrei.
Von AVG überprüft - www.avg.de
Version: 8.0.238 / Virendatenbank: 270.11.22/2015 - Ausgabedatum: 03/20/09 19:01:00
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
- » [ddots-l] Re: can you mute one sound on a track whilst leaving the other sounds? - what I think about it and a nice idea for using siedechains. - Drachenkind
