Make sure that you are using the right control dll. also make sure the fw1884
is in computer mode
Regards, DJX
________________________________
From: ddots-l-bounce@xxxxxxxxxxxxx <ddots-l-bounce@xxxxxxxxxxxxx> on behalf of
Jim Jackson <cs2011@xxxxxxx>
Sent: Sunday, October 29, 2017 10:07:16 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: [ddots-l] Re: [ddots-l] Re: [ddots-l] Re: [ddots-l]
Sonar doesn’t list my control surface
Also, whenever I attempt to select the inputs and outputs for the control
surface by pressing enter on eithe option, nothing happens.
Sent from my iPhone
On Oct 29, 2017, at 1:29 AM, Jim Jackson
<cs2011@xxxxxxx<mailto:cs2011@xxxxxxx>> wrote:
I found and installed it. Which drivers do I use?
Sent from my iPhone
On Oct 29, 2017, at 12:21 AM, Jim Jackson
<cs2011@xxxxxxx<mailto:cs2011@xxxxxxx>> wrote:
No! I don’t know what exactly what or how to search for it on the tascam site.
I’m running 64 bit.
Sent from my iPhone
On Oct 28, 2017, at 10:16 PM, DJX
<megamansuperior@xxxxxxxxxxx<mailto:megamansuperior@xxxxxxxxxxx>> wrote:
Did you install the control surface plugin? For the platform you are using (32
or 64 bit)?
Regards, DJX
________________________________
From: ddots-l-bounce@xxxxxxxxxxxxx<mailto:ddots-l-bounce@xxxxxxxxxxxxx>
<ddots-l-bounce@xxxxxxxxxxxxx<mailto:ddots-l-bounce@xxxxxxxxxxxxx>> on behalf
of Jim Jackson <cs2011@xxxxxxx<mailto:cs2011@xxxxxxx>>
Sent: Saturday, October 28, 2017 9:25:43 PM
To: Dancing Dotts
Subject: [ddots-l] Sonar doesn’t list my control surface
I’m using the tascam fw1884 control surface but sonar doesn’t list the device.
There is a tascam us but that’s not what I’m using. Thoughts?
Sent from my iPhone
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx<mailto:ddots-l-request@xxxxxxxxxxxxx>?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx<mailto:ddots-l-request@xxxxxxxxxxxxx>
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx<mailto:ddots-l-request@xxxxxxxxxxxxx>?subject�q or
send a message, to
ddots-l-request@xxxxxxxxxxxxx<mailto:ddots-l-request@xxxxxxxxxxxxx>
and in the Subject line type
faq