[ddots-l] Re: midi setup
- From: "Omar Binno" <omarbinno@xxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Mon, 9 Mar 2009 13:37:53 -0400
MessageThat would be a problem because the motif only has 1 "in" midi port. So
it's either the external device i'm using that would go to the "in" port, or
the interface.
Omar Binno
AIM: LOD1116
Skype: obinno1
Website: www.omarbinno.com
----- Original Message -----
From: Kevin Gibbs
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, March 09, 2009 12:59 PM
Subject: [ddots-l] Re: midi setup
Also come out of the interface to the motiv.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Omar Binno
Sent: Monday, March 09, 2009 3:24 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: midi setup
So the setup should looke like this then? Come out from the motif's midi
through port and into the midi interface. Come out from the scale converter's
midi out port into the motif's midi in port?
Omar Binno
AIM: LOD1116
Skype: obinno1
Website: www.omarbinno.com
----- Original Message -----
From: Kevin Gibbs
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, March 09, 2009 4:21 AM
Subject: [ddots-l] Re: midi setup
In anyevent, you have to have MIDI flowing in both directions. A MIDI
THRU at some point in the chain seems like a reasonable option. That THRU
should probably go from the THRU of the Motif to the IN of the interface. It's
been years since I used a THRU port but that seems reasonable until someone
corrects me.
Kevin
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Omar Binno
Sent: Monday, March 09, 2009 3:15 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: midi setup
The other device isn't a synth. it's a converter that allows me to
change scales in the motif for ethnic music.
Omar Binno
AIM: LOD1116
Skype: obinno1
Website: www.omarbinno.com
----- Original Message -----
From: Kevin Gibbs
To: ddots-l@xxxxxxxxxxxxx
Sent: Monday, March 09, 2009 4:10 AM
Subject: [ddots-l] Re: midi setup
If you have a multi port interface, you can run both devices into it
and enable MIDI echo on both tracks. Or, you could use a MIDI THRU port on the
motiv into the interface, I guess.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx
[mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Mike Christer
Sent: Sunday, March 08, 2009 3:25 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: midi setup
P'raps, you could use a midi merge?
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Sunday, March 08, 2009 8:07 PM
Subject: [ddots-l] Re: midi setup
Hmm, that complicates things, because I'm also using an external
midi device to send some midi signals into the motif, so the midi in port of
the motif is being occupied by this other device. Any suggestions?
OMAR BINNO
AIM: LOD1116
SKYPE: obinno1
WEBSITE: www.omarbinno.com
----- Original Message -----
From: Craig Spencer
To: ddots-l@xxxxxxxxxxxxx
Sent: Sunday, March 08, 2009 3:58 PM
Subject: [ddots-l] Re: midi setup
You will also have to go midi out from your interface to midi
in on the Motif.
----- Original Message -----
From: Omar Binno
To: ddots-l@xxxxxxxxxxxxx
Sent: Sunday, March 08, 2009 3:41 PM
Subject: [ddots-l] midi setup
Hi,
I'm connecting the motif es6 via midi to record into sonar.
I'm going midi out from the motif to the midi in of my audio interface. What
should i check and uncheck in the midi devices inputs and outputs in sonar? i'm
not getting any sound right now.
Thanks.
OMAR BINNO
AIM: LOD1116
SKYPE: obinno1
WEBSITE: www.omarbinno.com
Other related posts:
