MessageYes we do. Just press f4 and open up the properties menu. There, you can select what channels will be routed to which audio outputs. Gord ----- Original Message ----- From: Kevin Gibbs To: ddots-l@xxxxxxxxxxxxx Sent: Monday, August 06, 2007 12:03 AM Subject: [ddots-l] Re: question about all outputs in the TTS Do we now have access to multiple audio outputs in the TTS1? I didn't think so. However, I've been out of the loop for months on this and other issues. Scrambling to catch up, Kevin -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Bob Reid Info Sent: Sunday, August 05, 2007 6:20 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: question about all outputs in the TTS Have you read the soft synthe document that should come with Caketalking 6.2.4? Go into the TTS1 properties and press f4 to access the dialogs. You set each output and channel from there. In my recent experience, any other manipulation of the patches such as filtering is best done in the inspector. Bob. ----- Original Message ----- From: neville To: ddots-l@xxxxxxxxxxxxx Sent: Sunday, August 05, 2007 3:03 PM Subject: [ddots-l] question about all outputs in the TTS When I inserted the TTS, I checked the all outputs option in the insert softsynth dialog. Four audio tracks and one midi track appeared. Hear's my question. The midi track has the first output listed. How do I output to the other three audio tracks? In the output menu of the midi track only the first output of the TTS is available. I inserted three other midi tracks, but I could not figure out how to output them to the other audio tracks, because again there are no other outputs except the first one.