Hi: When I record an audio track, I'd like to have outs 1 and 2 of my delta 66 go right into my powered monitors. I'd like to send outputs 3 and 4 to a headphone amp. Right now, I can only set a track for one set of outputs I.e. 3/4 or 1/2. Can I set an additional bus or something to enable all four outputs to play on the same track? John John J. Fioravanti, Jr. FIORAVANTI & KNIGHT 93 East Court Street Doylestown, PA 18901 (215)348-9133 The information contained in this electronic mail transmission is intended solely for the addressee(s) named above. If you are not an addressee, or responsible for delivering this transmission to an addressee, you have received this transmission in error and you are strictly prohibited from reading or disclosing it. The information contained in this transmission is highly confidential and may be subject to legally enforceable privileges. Unless you are an addressee, or associated with an addressee for delivery purposes, you may violate these privileges and subject yourself to liability if you do anything with this transmission other than immediately contact us by telephone at (215)348-9133 or by electronic mail at fioresq1@xxxxxxxxxxx and delete this transmission. Thank you. ** To leave the list, click on the immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe] ** If this link doesn't work then send a message to: ** ddots-l-request@xxxxxxxxxxxxx ** and in the Subject line type ** unsubscribe ** For other list commands such as vacation mode, click on the ** immediately-following link:- ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq] ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq