[ddots-l] Re: sonar play back engine issues.
- From: D!J!X! <megamansuperior@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Thu, 22 Aug 2013 16:27:26 -0400
Hi, since you have a quad capture, I would recommend uninstalling asio for
all (unless you really need it), and use your interface's native asio
drivers. Download the latest and give that a try after uninstalling asio for
all...
Regards, D!J!X!
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Nick D Daniels
Sent: Thursday, August 22, 2013 2:33 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: sonar play back engine issues.
The quad capture is in the list of audio devices, but I can't check or
uncheck it to make it the default record and play back device.
Infact, the only thing I can check or uncheck in my audio devices list is
the acio 4 all v 2. But sonar's telling me that it's not connected.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of D!J!X!
Sent: 22 August 2013 19:00
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: sonar play back engine issues.
There's a lot of things that could go wrong there, I doubt is the engine
though. Try this:
If you set something like winamp or windows media player to use the quad, do
you get sound out of it? Note that in media player, when you switch the
device you'll need to close and reopen the program for settings to take
effect. If you don't hear sound from media player or winamp when doing this,
it could be your speakers, a connection on the card, or something else gone
wrong with the card.
If you can hear sound, then start sonar, check the options>audio devices
settings, is the card listed as the master output and input devices? Note
that sometimes sonar wil set it to, specially if you started sonar without
the unit plugged in or turned on. Check and see if the card is even on the
list.
Check that and get back with results.
HTH, D!J!X!
none
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Nick D Daniels
Sent: Thursday, August 22, 2013 1:35 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: sonar play back engine issues.
Hi folks.
I've started having issues with the playback engine in sonar today.
At present, the prime sound card which I have assigned to sonar is the
Roland QuadCapture audio interface. And until today it seemed to be working
fine.
But today, I coulden't get anything to play back. It wasen't playing the
metronome, it wasen't playing back any audio or midi nothing.
Can any one recommend any tips for me to fix this problem?
Cheers, Nick.
-----Original Message-----
From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On
Behalf Of Efren Chavez
Sent: 20 August 2013 04:30
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: Matrix View
Yes, that's possible. download Bryan Smart's podcast from
www.dancingdots.com and forward till you get to the part where he talks
about the matrix view. He did an excellent job demonstrating the matrix
view. You can then read the tutorial to get a better idea of how to do it.
Lastly you can experiment with it and you will understand it.
The matrix view is organized into columns and cells wich you can add audio
to them. You can trigger entire columns and swop out cells with a different
loop or nothing.
Note, you can also coppy and paste. For example record 4 bars of a drum beat
and paste it over where you want it. If you change your mind and don't want
it in the beginning just cut it out. I typically start with the hook/corus
where a lot of activity is going on with all instruments. Then I decide how
I want the intro and build the track to the corus by taking certain elements
of the song out and moving to proper location. That is how I start, and of
cource get more ideas and improvise here and there.
On 8/19/13, Josh Stundon <joshstundon@xxxxxxxxx> wrote:
> hi,
> So I'm guessing that you have to record everything in your project
> first , put it into loops and then put it into the matrix view? What
> about if you wanted a long intro to a song, put a drum loop into a
> song for about 4 bars and then take it out again, is it possible to do
> something like that? Here is an example..
> http://youtu.be/Eq2pJJlUDys
>
> Sent from my iPhone
>
> On Aug 19, 2013, at 9:50 PM, Aidan <aidan.smarttalk@xxxxxxxxx> wrote:
>
>> Hi, yes with CakeTalking installed it is defnitly accessible, the
>> only thing I'm not sure of, and wich is a problem for me, is that you
>> con't record loops and build them from scratch in the maytricks view,
>> you must record your project and use the data you recorded to put
>> that into loops. That is one thing the roland fantum can do, you can
>> go into patten moad and record an build your pattens rite there
>> without recording in the main project. Hope this helps.
>>
>> On 19/08/2013, josh stundon <joshstundon@xxxxxxxxx> wrote:
>>> Hi All.
>>>
>>> I was just wondering if the matrix view is accessible with sonar 8.5
>>> producer? How does the matrix view work? Also, if it doesnt work is
>>> there an alternative way to arrange your music?
>>>
>>> Kind regards,
>>>
>>> Josh
>>
>>
>> --
>> Facebook: m.facebook.com/aidan.maher92
>> Skype: andries4451
>> Twitter: smarttalk7
>> Audioboo: www.audioboo.com/DjSpotlight PLEASE READ THIS FOOTER AT
>> LEAST ONCE!
>> To leave the list, click on the immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
>> If this link doesn't work then send a message to:
>> ddots-l-request@xxxxxxxxxxxxx
>> and in the Subject line type
>> unsubscribe
>> For other list commands such as vacation mode, click on the
>> immediately following link:
>> ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
>> ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
>>
>
--
Efren Chavez
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=subscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode, click on the immediately
following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or send a message, to
ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq
PLEASE READ THIS FOOTER AT LEAST ONCE!
To leave the list, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe
If this link doesn't work then send a message to:
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
unsubscribe
For other list commands such as vacation mode,
click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subjectúq or
send a message, to
ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type
faq
Other related posts:
