[ddots-l] Re: soundcard
- From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Tue, 30 May 2006 16:24:10 -0400
Hi Ginette!
Thanks for that!
Always on the lookout for equipment that will produce killer sound!
I don't mix in the box though. I use my 02r desk. I only use sonar to track,
so there is no summing in there. the 02r does that. I also have the
empirical labs fatso for tape analog simulation.
I wonder if that amplifier would surpass what I have?
I'll check it out.
Thanks, Jean]
----- Original Message -----
From: "Jeanette Contant-Galitello" <jeanette@xxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx>
Sent: Tuesday, May 30, 2006 3:49 PM
Subject: [ddots-l] Re: soundcard
> Sure Jean,
>
> It is a device from a company called Dangerous. It is a 2-Bus LT Analog
> Summing Amp. The 2 Bus LT is the budget version which costs $1,500. the
full
> 2 Bus costs about double that.
>
> Regards,
>
> Jeanette
>
> ----- Original Message -----
> From: "Studio Montebello" <studiomontebello@xxxxxxxxxxxx>
> To: <ddots-l@xxxxxxxxxxxxx>
> Sent: Tuesday, May 30, 2006 8:10 PM
> Subject: [ddots-l] Re: soundcard
>
>
> > Hi Ginette!
> > Nice french name!
> > Can you tell me a little bit more about this analog summing amplifier?
> > If you just give me the model nane and number, I'll look it up on
google!
> > Merci, Jean
> >
> > ----- Original Message -----
> > From: "Jeanette Contant-Galitello" <jeanette@xxxxxxxx>
> > To: <ddots-l@xxxxxxxxxxxxx>
> > Sent: Tuesday, May 30, 2006 8:26 AM
> > Subject: [ddots-l] Re: soundcard
> >
> >
> >> Hi Phil,
> >>
> >> I need 16 outputs because I will be routing them to an analogue summing
> >> amplifier, which takes the 16 channels and summs them into a stereo
> >> track.
> >> The summer does this much much better than any DAW can and adds depth,
> > width
> >> and definition to a mix.
> >>
> >> Regards,
> >> Jeanette
> >>
> >> ----- Original Message -----
> >> From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
> >> To: <ddots-l@xxxxxxxxxxxxx>
> >> Sent: Tuesday, May 30, 2006 1:00 PM
> >> Subject: [ddots-l] Re: soundcard
> >>
> >>
> >> > Hi Jeanette
> >> > !!
> >> >
> >> > Why do you need so many outputs? Curious.
> >> >
> >> > Regards, Phil Muir
> >> >
> >> > P J Muir Productions, Music and audio production,
> >> > Mixing, Mastering: www.philmuir.com/
> >> >
> >> > ----- Original Message -----
> >> > From: "Jeanette Contant-Galitello" <jeanette@xxxxxxxx>
> >> > To: <ddots-l@xxxxxxxxxxxxx>
> >> > Sent: Tuesday, May 30, 2006 8:58 AM
> >> > Subject: [ddots-l] Re: soundcard
> >> >
> >> >
> >> >> Hi,
> >> >>
> >> >> I too am going to be upgrading my soundcard. Inputs are not so much
a
> >> >> problem but I need 16 outputs. So far I am leading towards buying
two
> >> >> RME Fireface 800s. Does anyone else use these? They seem to have
> >> >> brilliant reviews but are quite expensive.
> >> >>
> >> >> Thanks,
> >> >> Jeanette
> >> >>
> >> >> ----- Original Message -----
> >> >> From: "Phil Muir" <philmuir1@xxxxxxxxxxx>
> >> >> To: <ddots-l@xxxxxxxxxxxxx>
> >> >> Sent: Monday, May 29, 2006 9:49 PM
> >> >> Subject: [ddots-l] Re: soundcard
> >> >>
> >> >>
> >> >>> Hi there!!
> >> >>>
> >> >>>
> >> >>> How long is a piece of string? Seriously, how many inputs do you
> >> >>> need
> >> >>> your soundcard to have? Also, there are a ton of mixing concels out
> >> >>> there. How many outputs would you like the mixer to have?
> >> >>>
> >> >>> Regards, Phil Muir
> >> >>>
> >> >>> P J Muir Productions, Music and audio production,
> >> >>> Mixing, Mastering: www.philmuir.com/
> >> >>>
> >> >>> ----- Original Message -----
> >> >>> From: <2470@xxxxxxxxxxxxx>
> >> >>> To: <ddots-l@xxxxxxxxxxxxx>
> >> >>> Sent: Monday, May 29, 2006 5:37 PM
> >> >>> Subject: [ddots-l] soundcard
> >> >>>
> >> >>>
> >> >>>>I would like to know what is the best soundcard to use for sonar 5,
> > and
> >> >>>>what would be the best external mixer to use when doing engineering
> >> >>>>vocals?
> >> >>>>
> >> >>>> ** To leave the list, click on the immediately-following link:-
> >> >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> >>>> ** If this link doesn't work then send a message to:
> >> >>>> ** ddots-l-request@xxxxxxxxxxxxx
> >> >>>> ** and in the Subject line type
> >> >>>> ** unsubscribe
> >> >>>> ** For other list commands such as vacation mode, click on the
> >> >>>> ** immediately-following link:-
> >> >>>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> >>>> ** or send a message, to
> >> >>>> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >> >>>>
> >> >>>>
> >> >>> ** To leave the list, click on the immediately-following link:-
> >> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> >>> ** If this link doesn't work then send a message to:
> >> >>> ** ddots-l-request@xxxxxxxxxxxxx
> >> >>> ** and in the Subject line type
> >> >>> ** unsubscribe
> >> >>> ** For other list commands such as vacation mode, click on the
> >> >>> ** immediately-following link:-
> >> >>> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> >>> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> >> >>> Subject:- faq
> >> >>>
> >> >>>
> >> >>>
> >> >>
> >> >>
> >> >>
> >> >> ** To leave the list, click on the immediately-following link:-
> >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> >> ** If this link doesn't work then send a message to:
> >> >> ** ddots-l-request@xxxxxxxxxxxxx
> >> >> ** and in the Subject line type
> >> >> ** unsubscribe
> >> >> ** For other list commands such as vacation mode, click on the
> >> >> ** immediately-following link:-
> >> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> >> ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> >> >> Subject:- faq
> >> >>
> >> > ** To leave the list, click on the immediately-following link:-
> >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> > ** If this link doesn't work then send a message to:
> >> > ** ddots-l-request@xxxxxxxxxxxxx
> >> > ** and in the Subject line type
> >> > ** unsubscribe
> >> > ** For other list commands such as vacation mode, click on the
> >> > ** immediately-following link:-
> >> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> > ** or send a message, to ** ddots-l-request@xxxxxxxxxxxxx with the
> >> > Subject:- faq
> >> >
> >> >
> >> >
> >>
> >>
> >>
> >> ** To leave the list, click on the immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> >> ** If this link doesn't work then send a message to:
> >> ** ddots-l-request@xxxxxxxxxxxxx
> >> ** and in the Subject line type
> >> ** unsubscribe
> >> ** For other list commands such as vacation mode, click on the
> >> ** immediately-following link:-
> >> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> >> ** or send a message, to
> >> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> > ** To leave the list, click on the immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> > ** If this link doesn't work then send a message to:
> > ** ddots-l-request@xxxxxxxxxxxxx
> > ** and in the Subject line type
> > ** unsubscribe
> > ** For other list commands such as vacation mode, click on the
> > ** immediately-following link:-
> > ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> > ** or send a message, to
> > ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
> >
> >
> >
>
>
>
> ** To leave the list, click on the immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
> ** If this link doesn't work then send a message to:
> ** ddots-l-request@xxxxxxxxxxxxx
> ** and in the Subject line type
> ** unsubscribe
> ** For other list commands such as vacation mode, click on the
> ** immediately-following link:-
> ** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
> ** or send a message, to
> ** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
** To leave the list, click on the immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe]
** If this link doesn't work then send a message to:
** ddots-l-request@xxxxxxxxxxxxx
** and in the Subject line type
** unsubscribe
** For other list commands such as vacation mode, click on the
** immediately-following link:-
** [mailto:ddots-l-request@xxxxxxxxxxxxx?subject=faq]
** or send a message, to
** ddots-l-request@xxxxxxxxxxxxx with the Subject:- faq
Other related posts:
