[ddots-l] Re: v vocal question
- From: "Charles Marston" <rumbero73@xxxxxxxxxxx>
- To: <ddots-l@xxxxxxxxxxxxx>
- Date: Sat, 21 Aug 2010 17:05:16 -0400
Brian:
When you move to the plot, it shows you the pitch and it also gives you a
certain number of cents. So, you will see something like C shart plus 30
cents. The normal range for every note is 50 cents below it up to 50 cents
above it. So, for C natural for example, the normal range is from B plus 50
cents, up to C plus 50 cents. Any thing below B plus 50 cents is closer to B
natural and everything above C plus 50 cents is closer to C sharp.
From: Brian Howerton
Sent: Saturday, August 21, 2010 4:42 PM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: v vocal question
Okay, It's not doing it just right with the autocorrect function. SOme sounds
fine but not all. Can you explain the pitch values when manipulating pitches
manually? That's kind of confusing. Thanks,
Brian
----- Original Message -----
From: Charles Marston
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, August 21, 2010 12:08 PM
Subject: [ddots-l] Re: v vocal question
Brian:
The option to work with larger segments is the second one in the F4 list.
That's the one you'll need to hit enter on.
If the project changes key, you will just select the segment in the area
where the new key applies and take all the steps I mentioned before.
Good luck.
From: Brian Howerton
Sent: Saturday, August 21, 2010 6:40 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] Re: v vocal question
Thank you Charles. I was hoping you would be the one who wrote me back since
you cleared up some things for me before... So let me get this straight...
There is an option in the f4 dialog that says to work on a larger section of
audio. I would chooose this option after pressing f4 once and hitting enter on
option 1 in that dialog is that correct? Now, what about later in the song if
there is a key change... How does that work if it stared in c and went to C
sharp? Thank you Charles!
Brian
----- Original Message -----
From: Charles Marston
To: ddots-l@xxxxxxxxxxxxx
Sent: Saturday, August 21, 2010 6:26 AM
Subject: [ddots-l] Re: v vocal question
Brian:
I believe that if you just want to use the autocorrection feature on
V-Vocal, you are not limited to three measures of audio. You can select a
longer segment, I do not know if you can go ahead and select the whole track,
and go through the same motions of bouncing to a clip and then creating the
V-Vocal clip. Once, V-Vocal opens, you need to press F4 and select the option
to work on a larger segment of audio. Then just press F6 to move to the plot
and use alt-enter to select the whole segment. After that, you can press F4
and arrow down to the option for a list of scales. Once you have selected C
major for example, you can then go through the several options with your tab
key. To perform the correction, you just press the letter C. If you do not
like the result, you can undo the correction by pressing control-z.
Yes, you need to create a V-Vocal clip per every segment of audio you want
to work on. Also remember, that V-Vocal is not a destructive effect, so you
can remove it through the clips view.
From: Brian Howerton
Sent: Saturday, August 21, 2010 6:08 AM
To: ddots-l@xxxxxxxxxxxxx
Subject: [ddots-l] v vocal question
Hello,
I've got some vocal tracks that need some minor vocal editing to them. I
read everything in the CakeTalking tutorial on v vocal and I understand
everything but one thing. Let's say I want to instead of correcting pitches
manually, I want to use the autocorrect feature to correct maybe an entire v
vocal clip. Let's say the song is in the key of C... I understand how to set
it to a particular scale, but how do I set v vocal to audo correct the v vocal
clip to a particular key like in my example if the song is in C... How do I
close the v vocal editer? ALso, let's say there is more vocal editing that
nees to be done on another part of the song, do you go through the same process
of selecting the audio in the track and doing all of that or since I've already
opened the v vocal editer once, are there other steps that need to be
performed? Those are the only things that weren't clear to me in the
tutorial... Thanks,
Brian
Other related posts:
