Hi Neville, Rather than use midi, you could use the snap shot? 1: Set a bus up and maybe call it, snap Shot bus.2: Assign all audio track outs you wish to make level changes too, to the Snap shot bus. 3: Now arrow across the bus columns until you get to Alternation Right Disabled, enter on this to enable it. 4: you now need to be at the beginning of the song so you can set the first volume level. 5: go to the volume level column on the snap shot bus, press enter and arrow to the volume you want and press enter again. 6: Whilst holding down control press the R key twice, this will give you a snap shot of the current level. 7: play the song to the point where you wish to have a different level, press control space so the song stops at that point. 8: make sure you're still on the Level column, press enter and arrow to the volume you want and press enter again. 9: whilst holding the control press the R key twice. This will give you a snap shot of the new level.
Just keep repeating the process.If you come back to the project the next day and you're not sure of the settings you made, just delete the snap shot bus and create a new one.
Neville, I'm sorry about the over the Top explanation, I'm just very aware we have a lot of knew Sonar users, I'm still not a native to the Sonar language myself, don't believe I ever will be.
Steve W----- Original Message ----- From: "Neville" <neville@xxxxxxxxxxxxxxxx>
To: <ddots-l@xxxxxxxxxxxxx> Sent: Wednesday, August 11, 2010 11:53 PM Subject: [ddots-l] Re: volume control
Okay I managed to delete them. Now I want to know if there is a way to insert volume control values with out inserting them as a fade in or fade out. I just want the volume to be at one level in the intro and at another level right before the vocal. There are other parts of the song where I need similar volume changes. I know that you can do this with the tempo and I have done it many times even on this project, how do I do it with the volume control. Thanks much for your input. May the peace of God which passes all understanding guard your heart and mind in Christ Jesus. God bless you! Music soft sacred and soulful Website http://www.nevillepeter.com email neville@xxxxxxxxxxxxxxxx phone 407-222-4488 -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx] On Behalf Of Kevin Gibbs Sent: Wednesday, August 11, 2010 4:19 PM To: ddots-l@xxxxxxxxxxxxx Subject: [ddots-l] Re: volume control It's possible that there are no CC7 events in your track. Open the event list for the track and press insert v, then isolate controller events to see if there are any. Sent from my iPhone On Aug 11, 2010, at 2:04 PM, "neville" <neville@xxxxxxxxxxxxxxxx> wrote:I must be selecting it wrong or something because when I press control f3 and the dialog comes up, after choosing volume controller 7 in the preset menu and pressing enter, jaws says no event matching your search criteria was found. I put 7 in the edit fields for both highest and lowest controler number,butsome how I think I'm missing something. May the peace of God which passes all understanding guard your heart and mind in Christ Jesus. God bless you! Music soft sacred and soulful Website http://www.nevillepeter.com email neville@xxxxxxxxxxxxxxxx phone 407-222-4488 -----Original Message----- From: ddots-l-bounce@xxxxxxxxxxxxx [mailto:ddots-l-bounce@xxxxxxxxxxxxx]OnBehalf Of Kevin Gibbs Sent: Wednesday, August 11, 2010 1:17 PM To: ddots-l@xxxxxxxxxxxxx Cc: <ddots-l@xxxxxxxxxxxxx> Subject: [ddots-l] Re: volume control You can select controller 7 in the event filter and delete that way. Sent from my iPhone On Aug 11, 2010, at 11:59 AM, "neville" <neville@xxxxxxxxxxxxxxxx> wrote:Can someone tell me how to delete midi volume control changes? I am not talking about automation on a midi track. I am talking about the volume controller numbers like 7 91. How would I delete so I can start overagain.May the peace of God which passes all understanding guard your heart and mind in Christ Jesus. God bless you! Music soft sacred and soulful Website http://www.nevillepeter.com email neville@xxxxxxxxxxxxxxxx phone 407-222-4488 PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faqPLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectzq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faqPLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=subscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subjectzq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribe For other list commands such as vacation mode, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=faq or send a message, to ddots-l-request@xxxxxxxxxxxxx and in the Subject line type faq __________ Information from ESET NOD32 Antivirus, version of virus signature database 5359 (20100811) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com
__________ Information from ESET NOD32 Antivirus, version of virus signature database 5359 (20100811) __________
The message was checked by ESET NOD32 Antivirus. http://www.eset.com __________ Information from ESET NOD32 Antivirus, version of virus signature database 5359 (20100811) __________ The message was checked by ESET NOD32 Antivirus. http://www.eset.com PLEASE READ THIS FOOTER AT LEAST ONCE! To leave the list, click on the immediately following link: ddots-l-request@xxxxxxxxxxxxx?subject=unsubscribe If this link doesn't work then send a message to: ddots-l-request@xxxxxxxxxxxxx and in the Subject line type unsubscribeFor other list commands such as vacation mode, click on the immediately following link:
ddots-l-request@xxxxxxxxxxxxx?subject=faq orsend a message, to ddots-l-request@xxxxxxxxxxxxx
and in the Subject line type faq