Hi Philippe, I'm based in England, and I will try to help you if I can, since it will be mid-day tomorrow before Duxbury will see any messages. First, can you tell me if you are blind please? If you are not, I will be able to send you screen pictures if I need to, otherwise I will do my best to explain in words. 1) Can you tell me how you have the ELEKUL connected to the PC. Is it with Parallel Connection or Serial? And are you quite sure you are using the correct cable? 2) Have you been able to prove that the ELEKUL and the PC are talking to each other? The way I usually do this, is to go into a DOS Window, and at the Command prompt, I send a simple text file to the port. For example:- copy myfile.txt>lpt1 or possibly:- copy myfile.txt>com1 3) If the ELEKUL is connected to the Serial Port, have you made sure that the Serial Parameters of the ELEKUL and also the PC are set to the same? 4) In Duxbury, in the Global settings, are you using a Port:, or Windows Device (Périph. Windows)? 5) What does the ELEKUL User's Manual say about connecting to a PC. Does it tell you if there are any special drivers required? Sorry to ask so many questions, but your answer may help to find out what is wrong. George Bell Techno-Vision Systems Ltd > -----Original Message----- > From: pvdb [mailto:vandenbrande@xxxxxxxxxx] > Sent: 17 November 2002 16:23 > To: duxuser@xxxxxxxxxxxxx > Subject: [duxuser] DBT + ELEKUL > > > Hello, > > > > More information: > > > > I tried DBT 10.4 ( French version) on 3 different PC (and > different material > configuration). On one of the machines, Windows 98 was > installed, the other > one, Windows 95. Naturally, the parameter settings of the > printer Elekul55 > (double side) in DBT were every time made. Also, is suitably > settled the DOS > PRINT55 program called by DBT to be able to create a > temporary file and send > it for printing on Elekul. > > But no possible printing at this day! > > Sorry for my bad English. > > > > Kind regards, > > Philippe van den Brande > > > > * * * > * This message is via list duxuser at freelists.org. > * To unsubscribe, send a blank message with > * unsubscribe > * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also > * subscribe, unsubscribe, and set vacation mode and other subscription > * options by visiting //www.freelists.org. The list archive > * is also located there. > * Duxbury Systems' web site is http://www.duxburysystems.com > * * * > * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *