[duxuser] Re: Error in Opening File.
- From: Blind Persons' Association <bpaindia@xxxxxxxx>
- To: duxuser@xxxxxxxxxxxxx
- Date: Fri, 02 Sep 2005 06:18:43 +0530
It was an attachment. Besides, I opened other .dxb attachment from that
machine. I checked the file on that machine with sighted help. Several
margin codes like level2 and level3 are there. I removed most of them,
stille I could not open it from other machine. However, margins should not
generate error in style information.
With best regards
Amiyo.
----- Original Message -----
From: "Dave Durber" <dadurber@xxxxxxxxxxxxx>
To: <duxuser@xxxxxxxxxxxxx>
Sent: Thursday, September 01, 2005 5:26 PM
Subject: [duxuser] Re: Error in Opening File.
> Try the following suggestion!
>
> 1. Go to the original machine, zip up the file with WinZip and then
> attach the file to an e-mail message and e-mail it again.
>
> 2. Go to the new machine, download the e-mail with the attach file,
> unzip the file and then try importing it into DBT.
>
> Sincerely:
>
> Dave Durber
>
> On Thu, 01 Sep 2005 06:25:26 +0530, you wrote:
>
> >Yes, I transferred it by email. I shall try it once on a floppy. The
problem is that the floppy drive of that pc is not in good condition either.
> >
> >With best regards
> >Amiyo.
> > ----- Original Message -----
> > From: Mike Gorse
> > To: duxuser@xxxxxxxxxxxxx
> > Sent: Wednesday, August 31, 2005 7:06 AM
> > Subject: [duxuser] Re: Error in Opening File.
> >
> >
> > Hi Amiyo,
> >
> > How are you transferring the file? Are you sure that it is not
becoming corrupted in the process of transferring it (does the file have the
same size on both computers)? If you are transferring via email, for
instance, it is possible that it is not being encoded correctly or that the
encoding is being interpreted differently by the mail cclient on the sending
machine than by the mail client on the receiving machine. I have had
similar problems before where a file with a line beginning with a . would
appear to start with two periods after it had been emailed to me.
> >
> > -Mike
> >
> > ----- Original Message -----
> > From: Blind Persons' Association
> > To: DuxUsers
> > Sent: Tuesday, August 30, 2005 8:38 PM
> > Subject: [duxuser] Error in Opening File.
> >
> >
> > Hello,
> >
> > We cannot open a Bengali .dxb file written in 6 key mode in dbt10.3.
The error message is "Error reading style information. OK"
> >
> > I tried to open the file in dbt10.3 and 10.4 on other pc's, but it
did not open. The pc where the file was written has Windows 95, dbt10.3, and
panda antivirus software installed on it. However, the file can be opened
only in that pc where it was written. But it does not have an embosser
attached to it. It does not have jaws either. The user mistakenly associated
.dxb file type with acrobat 3.0. I removed the file association from Folder
option though.
> >
> > I can send the file as attachment for checking.
> >
> > With best regards
> > Amiyo.
>
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting //www.freelists.org. The list archive
> * is also located there.
> * Duxbury Systems' web site is http://www.duxburysystems.com
> * * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts:
