Hi,
There are two parts here, so to speak. Adding in Windows and adding in DBT.
Fist, how have you set up the embosser in Windows? Is it connected Parallel or
USB? Have you tested it at this point to prove the PC is seeing it. We
usually use something like Windows Notepad, type in some text, and print. If
that fails, whatever you do in Duxbury is unlikely to work.
A common problem is that the embosser may not be set to use the correct output.
You will find a copy of the manual here if you do not have one.
http://www.brailler.com/images/downloads/manuals/AllJulietSeriesETThomasSeriesManual.pdf
However, if you are using a USB to Parallel adaptor, it may well not be using
the correct USB Port, so let us know if that is the case.
Once set up and working in Windows, we can tackle the Duxbury side.
George
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On ;
Behalf Of Louise Braille
Sent: 27 January 2017 21:17
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Juliet Pro 60
I am trying to get my printer up and printing however after getting it listed
on the printer listing and asking for print, it says I must configure it before
printing.
Windows 10 using generic driver from Windows.
Any help would be appreciated
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to duxuser-request@xxxxxxxxxxxxx . You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting www.freelists.org . The list archive
* is also located there.
* Duxbury Systems' web site is www.duxburysystems.com
* * *
