----- Original Message ----- From: Ann Edie To: duxuser@xxxxxxxxxxxxx Cc: john.farina@xxxxxxxxxxxxx Sent: Monday, July 11, 2005 12:31 PM Subject: [duxuser] Juliet Settings Hello I have the Juliet as well. You can do everything you need from Duxbury. If you have any specific questions please contact me off list. I will try and help. There is a setting to get the Juliet to do single pages. All the settings are under global and then embosser set up in duxbury. I find I only need to use the off line key then ff for form feed to tear off the pages properly and #2 E to reset the top setting for the paper. Hopes this helps some.Hi, I am just getting started using Duxbury 10.5 and the Juliet Classic embosser. I need to know if there are any adjustments to be made at the embosser side of the system as to margins and other settings. Also, when I tested the embosser with a short, 2 sentence document, the embosser printed the same two lines on both the front and the back of the page. This seems strange to me. How do I get it to print only once? Ann