MessageHi Terry, Try resetting the Juliet back to Factory Defaults: OL 0.0E 95E 96E 98E 99E 1E If that does not work uncheck allow escape codes in embosser setup (Document Embosser Setup or Global Embosser Setup for new documents), Edit, Device Settings Tab. The Juliet Pro can emboss 56 characters per line, the factory default is 42. If you don't allow escape codes you will need to manually setup the left and right margin settings in a user menu to emboss greater than 42 characters per line. In extreme cases you can select a single sided embosser like the Romeo 25 and let the Juliet format your data for interpoint embossing. I hope this helps. Best Regards, Mark ----- Original Message ----- From: Bray, Terry To: duxuser@xxxxxxxxxxxxx Sent: Tuesday, April 12, 2005 8:04 AM Subject: [duxuser] Re: Printing Problem thanks George when I get a chance I will do that. Unfortunately the printer is at home and I can call from work but can't do anything with it. it is strange though as it didn't do this with previous versions of Dux and I never change the printer settings. have a good day. -----Original Message----- From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of George Bell Sent: April 11, 2005 4:22 PM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: Printing Problem Hi Terry, Can I suggest you call Duxbury Tech support? Dan or Don should be able to sort you out. George. ---------------------------------------------------------------------------- From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Bray, Terry Sent: 11 April 2005 18:11 To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Printing Problem Hello: I have a table that I created in word. The import goes fine and everything looks fine however when I in boss the first page is fine however the second page is indented half way across the page. This actually happens on every second page. I am in bossing on a Juliet pro and have noticed this tendency before. Has anyone any idea why this is happening? it sure is a waist of paper and it happens even when not using a table so I don't think the table is the problem. Terry Bray System Support Analyst Adaptive Technology Services - Strategy and Planning Desktop Planning & Design ENTERPRISE INFRASTRUCTURE OPERATIONS, Technology & Solutions BMO Financial Group Phone: 416- 549-6190 Fax: 416-549-6565 E-mail terry.bray@xxxxxxx Visit us at the following address http://ns.bmogc.net/ats/ Mailing Address: Bank of Montreal 4881 Yonge Street, 8th Floor, YSC1 Yonge & Sheppard Centre Toronto, Ontario M2N 5X3 ---------------------------------------------------------------------------- This Message has been scanned for viruses by McAfee Groupshield.