[duxuser] Re: Printing labels to stick on the back of business cards
- From: André van Deventer <andre@xxxxxxxxxxxxxxxxx>
- To: <duxuser@xxxxxxxxxxxxx>
- Date: Wed, 25 May 2005 22:30:03 +0200
Jeff
Thanks - I'll definitely look into that one.
Andre
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
Behalf Of Senge, Jeff
Sent: 25 May 2005 10:09 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Printing labels to stick on the back of business
cards
Hi All,
I usually stay pretty quiet on this list but read the postings regularly. I
use a tool from the American Printing House for the Blind to Braille emboss
my business cards. Its a dedicated hand operated press type device that APH
custom makes for you. Simply slide a card in, squeeze once and the job is
done. I think this is how most of the folks I know Braille their business
cards. Check out www.aph.org for further details.
Jeff
Jeffrey C. Senge
Information & Computer Access Program Coordinator California State
University, Fullerton
(714) 278-7253
jsenge@xxxxxxxxxxxxx
-----Original Message-----
From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx]
On Behalf Of Betsy Whitney, Dolphin Press
Sent: Wednesday, May 25, 2005 12:53 PM
To: duxuser@xxxxxxxxxxxxx
Subject: [duxuser] Re: Printing labels to stick on the back of business
cards
I have not had much luck with embossing labels for business cards. Many of
the cards now have print on both sides and so the braille label has to be
clear. We braille lots of business cards by hand here at Dolphin Press. We
also had trouble lining up the label exactly on the card. It is very time
consuming, but we haven't found a better way.
At 09:15 AM 5/25/2005, you wrote:
>Caroline, in our Library we use cassette labels that are somewhat as
>you describe, except they have an oval cutout in the middle where the
>innards that make the tape turn are. The only way we can get even three
>lines of Braille on these labels is to use a Braille Blazer, which has
>Label Mode, which sort of scrunches the space between words and between
>lines. Still legible, but compressed. Then we have to create the file
>in a Braille Lite, that has provision for a half a line space. Duxbury
>won't do this. Duxbury works great for the book labels, which are 3
>inches by 8-1/2 inches; you can use standard line spacing for that.
>
>So my concern with Andre's problem is that he's not going to be able to
>get much Braille on the back of a business card. Here at the Iowa
>Department for the Blind, we send our business cards off somewhere, I
>know not where, (the front office here would know) to be Brailled, and
>you only can get a fraction of the print text on them.
>
>It also seems to me that there is a hand-held device that you can have
>custom made so it will emboss your business cards; this doesn't help
>Andre much. There must be someplace that does this embossing of
>business cards, as when one attends a tech conference everybody has
>Braille on their business cards. For the short term, I'd suggest doing
>them by hand.
>
>Susie
>
>
>Susie Stageberg
>Project ASSIST with Windows
>Iowa Department for the Blind
>(515) 281-1351
>stageberg.susan@xxxxxxxxxxxxxxxxx
>
>-----Original Message-----
>From: duxuser-bounce@xxxxxxxxxxxxx
>[mailto:duxuser-bounce@xxxxxxxxxxxxx]
>On Behalf Of Caroline Congdon
>Sent: Wednesday, May 25, 2005 1:45 PM
>To: duxuser@xxxxxxxxxxxxx
>Subject: [duxuser] Re: Printing labels to stick on the back of business
>cards
>
>
>Andre, I am running into a very similar situation. I found labels that
>fit nicely on business cards and that have tractor-feed sprockets on
>each side.
>These labels are available from IRTI in the US. However, I have not
>attempted to emboss on these labels yet for a couple of reasons.
>First, in order to get as much information as possible onto each label
>you need to
>
>make sure that your margins are absolutely precise. I accomplished
>this
>
>using a standard slate and stylus. Using this method, I was able to
>get
>5
>lines of braille on each label with 11 characters at most on each line.
>I
>found that this is such a precise thing that I haven't been comfortable
>attempting it with my embosser yet. I would love to hear from others
>who have been through this all ready though. Good luck.
>
>Caroline
>
>Caroline Congdon; Milwaukee, Wisconsin
>Mailto:carolinecongdon@xxxxxxxxxxxxx
>Web site: http://home.earthlink.net/~carolinecongdon/
>MSN/Windows Messenger: carolinecongdon@xxxxxxxxxxx
>
>* * *
>* This message is via list duxuser at freelists.org.
>* To unsubscribe, send a blank message with
>* unsubscribe
>* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
>* subscribe, unsubscribe, and set vacation mode and other subscription
>* options by visiting //www.freelists.org. The list archive
>* is also located there.
>* Duxbury Systems' web site is http://www.duxburysystems.com
>* * *
>* * *
>* This message is via list duxuser at freelists.org.
>* To unsubscribe, send a blank message with
>* unsubscribe
>* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
>* subscribe, unsubscribe, and set vacation mode and other subscription
>* options by visiting //www.freelists.org. The list archive
>* is also located there.
>* Duxbury Systems' web site is http://www.duxburysystems.com
>* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting //www.freelists.org. The list archive
* is also located there.
* Duxbury Systems' web site is http://www.duxburysystems.com
* * *
Other related posts: