MessageHi David, The Romeo has a 4 row, 4 column, 16-key keypad. Here are the key locations: 7 8 9 OL 4 5 6 LF 1 2 3 FF 0 . E V To reset the embosser: Press the "OL" key (row 1, column 4) Press the "0" key (row 4, column 1) Press the "point" key (row 4, column 2) Press the "0" key (row 4, column 1) Press the "E" (row 4, column 3) Press the "9" key (row 1, column 3) Press the "5" key (row 2 , column 2) Press the "E" (row 4, column 3) Press the "9" key (row 1, column 3) Press the "6" key (row 2 , column 3) Press the "E" (row 4, column 3) Press the "9" key (row 1, column 3) Press the "8" key (row 1 , column 2) Press the "E" (row 4, column 3) Press the "9" key (row 1, column 3) Press the "9" key (row 1 , column 3) Press the "E" (row 4, column 3) Press the "1" key (row 1, column 3) Press the "E" (row 4, column 3) Here is a summary: OL GO OFF-LINE to COMMAND ENTRY MODE 95E Load defaults into NOV-RAM 96E Zero the NOV-RAM checksum 98E Calculate new checksum 99E Verify the NOV-RAM checksum 1E Reset System and GO ON-LINE Here is a link to the user manual on our web-site: http://www.brailler.com/ftp/rclas.txt Print Version http://www.brailler.com/ftp/rclasbrf.txt Grade-2 Braille I hope this helps. Best Regards, Mark ----- Original Message ----- From: David Truong To: duxuser@xxxxxxxxxxxxx Sent: Sunday, April 10, 2005 7:21 PM Subject: [duxuser] Resetting a Romeo Braille 40. Hi Everyone, Can someone please tell me how I go about resetting my Romeo Braile 40 (RB40) Braille Embosser? I don't have the manual and I want to reset this embosser to its defaults to see if it'll fix a little problem I'm having. If giving instructions for the key pad, please could you explain where on the keypad each key you mention can be located? Thanks in advance, David Truong E-mail and MS messenger: davidtruong@xxxxxxxxxxxxxxx Skype: blindboxer1967 Home Page: http://members.optusnet.com.au/davidtruong/