[duxuser] Re: Viewing a braille translated document and garbage when embossing.
- From: Anders Holmberg <anders@xxxxxxxxxxxxxx>
- To: duxuser@xxxxxxxxxxxxx
- Date: Thu, 3 Jul 2014 15:05:33 +0200
Hi!
Yes i am.
I have a Blista btec 100 and its set up correctly in dbt.
/A
3 jul 2014 kl. 00:26 skrev George Bell <george@xxxxxxxxxxxxxxxxxxx>:
>
>
> Are you quite sure that the correct version of Index in selected in Global:
> Embosser Setup in DBT.
>
> George.
>
> -----Original Message-----
> From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
> Behalf Of Nigel Herring
> Sent: 02 July 2014 22:38
> To: duxuser@xxxxxxxxxxxxx
> Subject: [duxuser] Re: Viewing a braille translated document and garbage when
> embossing.
>
>
>
> HI Anders,
>
> Do you have Code View enabled by mistake? Alt F3 toggles this on and off.
>
> Nigel
>
> Pentronics
> Sales, Service & Support of Adaptive Technologies for the Blind & Vision
> Impaired Master Distributor of Index Braille products
> 27 Birkdale Circuit
> Glenmore Park
> NSW 2745
> Tel. +61 2 4735 7355
> Email. service@xxxxxxxxxxxxxxxxx
> Web. www.pentronics.com.au
>
>
> -----Original Message-----
> From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On
> Behalf Of Anders Holmberg
> Sent: Wednesday, 2 July 2014 5:10 AM
> To: duxuser@xxxxxxxxxxxxx
> Subject: [duxuser] Re: Viewing a braille translated document and garbage when
> embossing.
>
>
>
> Hi!
> Ok.
> But what about the garbage in between the text i have translated.
> Not embossed though.
> /A
> 30 jun 2014 kl. 11:21 skrev Nigel Herring <nigel@xxxxxxxxxxxxxxxxx>:
>
>>
>>
>> Hi Anders,
>>
>> I'm wondering if this might be the escape sequence or command string
>> that Duxbury sends to an embosser to set the page format and margins
>> etc. If
> the
>> embosser doesn't recognise the command string it will emboss it as
>> ASCII text on the first line of the document. This could happen if you
>> have inadvertently selected the wrong embosser type.
>>
>> Regards,
>> Nigel Herring
>>
>> Pentronics
>> Sales, Service & Support of Adaptive Technologies for the Blind &
>> Vision Impaired Master Distributor of Index Braille products
>> 27 Birkdale Circuit
>> Glenmore Park
>> NSW 2745
>> Tel. +61 2 4735 7355
>> Email. service@xxxxxxxxxxxxxxxxx
>> Web. www.pentronics.com.au
>>
>>
>> -----Original Message-----
>> From: duxuser-bounce@xxxxxxxxxxxxx
>> [mailto:duxuser-bounce@xxxxxxxxxxxxx]
> On
>> Behalf Of Anders Holmberg
>> Sent: Sunday, 29 June 2014 12:58 AM
>> To: duxuser@xxxxxxxxxxxxx
>> Subject: [duxuser] Viewing a braille translated document and garbage
>> when embossing.
>>
>>
>>
>> Hi!
>> I have a little problem i can't really find a sollution to.
>> Tomorrow i am going to read a bible text in my church and i have
>> prepared
> it
>> and pressed ctrl t to translate it to braille.
>> However when i have done this i see a lot of extra characters which i
> guess
>> has to do with how the braille should be embossed.
>> So i did a trial emboss and yes it workd but on the first line there
>> were garbage letters and then came the text.
>> So i put a new paper into the embosser and when i did that it
>> continued embossing two lines on a garbage characters.
>> I have dbt 11.01 sr4 and can not afford a newer version for now.
>> I Have a brailletec 100 embosser to emboss with.
>> Any thoughts on this?
>> /A* * *
>> * This message is via list duxuser at freelists.org.
>> * To unsubscribe, send a blank message with
>> * unsubscribe
>> * as the subject to duxuser-request@xxxxxxxxxxxxx . You may also
>> * subscribe, unsubscribe, and set vacation mode and other subscription
>> * options by visiting www.freelists.org . The list archive
>> * is also located there.
>> * Duxbury Systems' web site is www.duxburysystems.com
>> * * *
>>
>>
>>
>> * * *
>> * This message is via list duxuser at freelists.org.
>> * To unsubscribe, send a blank message with
>> * unsubscribe
>> * as the subject to duxuser-request@xxxxxxxxxxxxx . You may also
>> * subscribe, unsubscribe, and set vacation mode and other subscription
>> * options by visiting www.freelists.org . The list archive
>> * is also located there.
>> * Duxbury Systems' web site is www.duxburysystems.com
>> * * *
>
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to duxuser-request@xxxxxxxxxxxxx . You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting www.freelists.org . The list archive
> * is also located there.
> * Duxbury Systems' web site is www.duxburysystems.com
> * * *
>
>
>
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to duxuser-request@xxxxxxxxxxxxx . You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting www.freelists.org . The list archive
> * is also located there.
> * Duxbury Systems' web site is www.duxburysystems.com
> * * *
> * * *
> * This message is via list duxuser at freelists.org.
> * To unsubscribe, send a blank message with
> * unsubscribe
> * as the subject to duxuser-request@xxxxxxxxxxxxx . You may also
> * subscribe, unsubscribe, and set vacation mode and other subscription
> * options by visiting www.freelists.org . The list archive
> * is also located there.
> * Duxbury Systems' web site is www.duxburysystems.com
> * * *
* * *
* This message is via list duxuser at freelists.org.
* To unsubscribe, send a blank message with
* unsubscribe
* as the subject to duxuser-request@xxxxxxxxxxxxx . You may also
* subscribe, unsubscribe, and set vacation mode and other subscription
* options by visiting www.freelists.org . The list archive
* is also located there.
* Duxbury Systems' web site is www.duxburysystems.com
* * *
Other related posts:
