What I have done in the past is use a clear plastic labeling sheet, American Thermoform has them in tractor feed, and then cover the card with the plastic overlay. To create what I wanted on the card I simply used DBT to create the information. Stephen Dawes <B.A., B.Sc.> Management Systems Analyst Innovation Office, Information Technology #8245 | Phone: (403) 268-5527 The City of Calgary | Fax: (403) 268-2546 PO Box 2100 Postal Station M. | Email: Stephen.Dawes@xxxxxxxxxx Calgary, Alberta, Canada. T2P 2M5 | Web: http://www.calgary.ca NOTICE - This communication is intended ONLY for the use of the person or entity named above and may contain information that is confidential or legally privileged. If you are not the intended recipient named above or a person responsible for delivering messages or communications to the intended recipient, YOU ARE HEREBY NOTIFIED that any use, distribution, or copying of this communication or any of the information contained in it is strictly prohibited. If you have received this communication in error, please notify us immediately by telephone and then destroy or delete this communication, or return it to us by mail if requested by us. The City of Calgary thanks you for your attention and cooperation. -----Original Message----- From: duxuser-bounce@xxxxxxxxxxxxx [mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Steve Dresser Sent: 2005 December 20 2:27 PM To: duxuser@xxxxxxxxxxxxx Subject: [duxuser] Re: business cards Re: Brailling Business cards Karen, In that case, I'd just put them into a Perkins brailler and write on them. Steve On Tuesday 12/20/05 16:01 Karen Delzer wrote: >But what to do about cards we already have printed, and all that's >needed is the braille on them? > >Karen Delzer > > >-----Original Message----- >From: duxuser-bounce@xxxxxxxxxxxxx >[mailto:duxuser-bounce@xxxxxxxxxxxxx]On Behalf Of David Pillischer >Sent: Tuesday, December 20, 2005 12:22 PM >To: duxuser@xxxxxxxxxxxxx >Subject: [duxuser] Re: [Norton AntiSpam] Re: Brailling Business cards > >Try an Everest Embosser. It has a sheet feed magazine which holds a >large number of pages of card stock, The Braille is embossed on single >sheets on both sides of the page in one pass. > >David Pillischer > >Sighted Electronics Inc > > > >-----Original Message----- >From: duxuser-bounce@xxxxxxxxxxxxx >[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Bray, Terry >Sent: Tuesday, December 20, 2005 2:23 PM >To: duxuser@xxxxxxxxxxxxx >Subject: [Norton AntiSpam] [duxuser] Re: Brailling Business cards > > > >Hum: > > > >your idea is great. I only have one problem these are single sheet card >stock. They would be business card such as your given in a workplace >with the work place information in print. > > > >many thanks though > > > > > >Terry Bray > >System Support Analyst > >Adaptive Technology Services - Strategy and Planning Desktop Planning & >Design > > ENTERPRISE INFRASTRUCTURE OPERATIONS, Technology & Solutions > >Phone 416-549-6190 > > > > > > > >---------- >From: duxuser-bounce@xxxxxxxxxxxxx >[mailto:duxuser-bounce@xxxxxxxxxxxxx] On Behalf Of Irwin Hott >Sent: Tuesday, December 20, 2005 1:39 PM >To: duxuser@xxxxxxxxxxxxx >Subject: [duxuser] Re: Brailling Business cards > >Hi, I use the tractor-fed adhesive clear plastic from American >thermoform Corp. > > > >I can get 6 cards per page; three on the left side and 3 on the right. > > > >I do the front and the back of the card to allow for more information. >I get 4 lines per side and I think 13 or 14 chars per line. > > > >So far I have formatted the cards in my Braille Lite and then brailled >the sheets on my Blazer. > > > >I skip a line after each back side of the card. > > * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * * * * * * This message is via list duxuser at freelists.org. * To unsubscribe, send a blank message with * unsubscribe * as the subject to <duxuser-request@xxxxxxxxxxxxx>. You may also * subscribe, unsubscribe, and set vacation mode and other subscription * options by visiting //www.freelists.org. The list archive * is also located there. * Duxbury Systems' web site is http://www.duxburysystems.com * * *