#4402: Failure to boot on Intel i810 hardware -----------------------+---------------------------------------------------- Reporter: vishy1618 | Owner: axeld Type: bug | Status: new Priority: normal | Milestone: R1 Component: - General | Version: R1/pre-alpha1 Keywords: | Blockedby: Platform: x86 | Blocking: -----------------------+---------------------------------------------------- Changes (by Pete): * cc: pete.goodeve@… (added) Comment: I've bee unable to boot on my i810 machine, either, in this case using the alpha1 CD. There seem to be two distinct problems: 1) If I use the onboard graphics chips, I see the same problem as vishy -- colour bars in the top corner and nothing else. (Didn't have serial debug attached at the time, so I can't provide a log.) 2) I plugged in a Matrox Millennium video card, and finally saw the standard boot screen, but it would reach the 'rocket' icon, as if it was launching, but nothing further would happen. I rearranged some cabling so I could get serial debug, and this is attached. (There seems to be some garbling at the start (bad serial sync?) but from then on it's complete.) I really hope a solution can be found for this, as the i810 is the only box I'm likely to be able to use for Haiku in the near future, aside from the donated laptop (thanks Scott), which unfortunately has no net access... -- Ticket URL: <http://dev.haiku-os.org/ticket/4402#comment:11> Haiku <http://dev.haiku-os.org> Haiku - the operating system.