[python] Re: Ice python and ice races
- From: "25hz" <25hz@xxxxxxxxxx>
- To: <python@xxxxxxxxxxxxx>
- Date: Thu, 23 Feb 2006 21:56:43 -0500
When we did the ice racing, Discovery Channel wanted to film it. I missed
it when it was on TV, but here's the video segment of it:
http://www.exn.ca/dailyplanet/view.asp?date=2/22/2006
Marcel is there with his ice python and there's a couple shots of me with
the tilting delta python. Marcel was really flying on his python . .
.again, but the combination of the hard ice and the LONG sharp blade we
ground meant that he was REALLY eating up the ice when he cornered :) We
also raced the next weekend in Toronto but I took the Sabre (ice trike)
instead of the python.
> Hi Tim,
>
> just read the impressive ice-race report on your site:
>
> http://bikes.jkcc.com/python%20clone.htm
>
> Too bad that the tire of Marcel went flat. I understood that he
> would have won the race otherwise.
>
> Here is the text for those who are interested:
>
> =============================================
>
> So, how well did it work? Well, as you can see in the picture, he
appears
> to be zipping along fairly well as he's setting himself up to go into the
> corner. In fact he went extremely well, and generally faster than most of
> the three wheelers there. Traction on the front wheel was great and the
> only problem he had was not being able to get enough bite with his rear
> blade, even though it had a pretty wicked edge ground on it, and polished
> with a whet stone. In the 2 man pursuit races, he got so much speed in
his
> first heat, that the rear end slid out on a corner unfortunately, and he
> went down. In the slaloms, his masterful riding control enabled him to
whip
> the python around the cones by sliding out the rear end slightly, and he
> beat all but the fastest two or three trikes. In the 10 minute criterium
> race, he was cruising around, and lapping other riders, and well on his
way
> to a podium finish when one of his tire screws somehow managed to cause a
> flat and he momentarily lost control and hit the boards pretty hard. He
got
> right up and back on, and finished out the race on a flat for the last few
> minutes and still managed a 4th overall (I think). Overall, it was an
> amazing effort for such an extreme bent and the biggest part of the
success
> was due to Marcel's riding ability.
>
> As for the traction issues on the rear end, I think that was due to
two
> reasons. I think the largest part of the problem is how the python turns.
> On a normal bike, the rear wheel gets pulled through the corner and
follows
> a line inside the front wheel's track, and has a fair bit of weight on
it -
> likely close to 50%. The python rear end doesn't follow, but rather it
> "turns" through the corner on its own path and as a result, I don't think
it
> puts down nearly the same force as a normally steered bike does. I know
> that Marcel and I could easily slide the rear wheel out on dry pavement by
> turning hard and at speed. Now take that same force, and try to turn hard
> with a blade on ice that can chip away under heavy loading, and I think
that
> is part of why the python rear end was weak at fast cornering. Add to
that,
> the fact that as the ice got chewed up from the racing, the blade was
> tracking across rough ice on the corners and further minimizing its
traction
> every time it encounterd crossing multiple ice grooves, and it lost even
> more traction. Even though the rear end would start sliding, Marcel
quickly
> mastered the art of letting the rear end do a power slide, while he kept
the
> power on and deftly used his left hand as an outrigger on the hard turns.
> It was amazing to watch him rip up the corners right on the edge of
> disaster, lap after lap, after lap :)
>
> Anyway, the ice python did an excellent job at the ice races, and I
> think it would definitely be tough to beat on larger tracks with larger
> radius corners. In the mean time, it'll get converted back to a "normal"
> python, and he was talking about possibly selling it.
============================================================
This is the Python Mailinglist
//www.freelists.org/list/python
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts:
