Hi all
Anyone think this may work ?
A mono tube python front end ?
The idea is to try and make the whole of the front end from a single
square tube 40mm x 40mm x 1.5mm ?
The idea is to weld a BB shell at the frame end [ 56' because it is for
a trike.] for the pivot.
Bracket for rear mech bolted on right of tube.
Than an assembly consisting of a BMX front hub [ the strong ones that
take a 14mm axle ] welded to 2 side plates of 3mm bolted to the main
frame with 3 x 8 mm bolts through anti crush tubes in main frame.
This hub will have a 14mm rear axle [ longest possible ] on the left of
the axle will be welded a complete 20" BMX front wheel ! on the right of
this axle will be screwed on a 14mm wheel nut [ big chrome one ] that is
welded to a right hand thread BB shell and a screw on cassette will be
mounted on that.
At the front will be welded another BB shell + front mech post for
pedals and front changer ?
The idea is that the wheel sits on the left and the cassette on the
right with the chain running on the right.
No specialist parts apart from front wheel welded to axle ?
Only because I cannot think of an easy way to attach the wheel to the
axle without it unscrewing ?
regards Paul
Attachment:
mono-tube-front-end-2.jpg
Description: JPEG image