hei jürgen and posse, put a good transmission on this somewhat fatter if smaller one should be nice. but there must be limits to the vergnügen. this is a great thing you run, best regards! careful now, tobi -----Ursprüngliche Nachricht----- Von: python-bounce@xxxxxxxxxxxxx [mailto:python-bounce@xxxxxxxxxxxxx] Im Auftrag von Jürgen Mages Gesendet: Dienstag, 3. Juni 2008 19:39 An: python@xxxxxxxxxxxxx Betreff: [python] Re: New Python Hello Jaime, Tobias Gommel has built a python with really fat tires. See attached picture. I think that apart from such a 20" front wheel there is no other realistic solution for your inseam length. On this page http://en.openbike.org/wiki/Pivot you will find a brief overview of steering pivot solutions. Ordinary steering heads have already been tried. A friend of mine has one and there is no sign of wear or play yet (1000 km), so I would give it a try. Cheers, Jürgen. On 03.06.2008 17:33, Jaime Cristovao wrote: > Hello all > > Here I am again with a hand full of questions... After some days of > "frying metal" (as someone said before) and reading some very > interesting posts here on python's mailing list, I must say, but the > things that raises me questions are much more than the others. Maybe I > raised the goals far above my skills, but I will not give up. So... > one question, maybe someone tried it before (I did not have the time > to read all previous posts, so maybe someone did): As I need a "fat" > front wheel tire, the "standard" python front wheel frame is a real > problem I was not able to solve yet. Solution (?): building an arch > over the front wheel from BB to center pivot, attached to the wheel > hub with a triangular structure. Does it seem practical to you (in > abstract)? Second question: In a previous post was discussed what is > better for the pivot. As I don't have another BB to use here, I was > planning to use a standard front wheel pivot from an old DF bike. Will > it be a good choice? There are very strong forces involved in the > center pivot so... I am not sure. Maybe someone can help me based on > experience. > > Thank you all, > > Jaime > > ============================================================ > > This is the Python Mailinglist > > //www.freelists.org/list/python > > Listmaster: Jürgen Mages jmages@xxxxxx > > To unsubscribe send an empty mail to > python-request@xxxxxxxxxxxxx > with 'unsubscribe' in the subject field. > > ============================================================ >
Attachment:
100_1664 copy~1.jpgcopy.jpg
Description: JPEG image