[python] how to deform front fork?
- From: "Koen Van de Kerckhove" <nestofdragons@xxxxxxxxxxx>
- To: python@xxxxxxxxxxxxx
- Date: Wed, 16 Nov 2005 19:33:50 +0000
Hallo,
I am nearly ending my second Python, but ... I have a problem I cannot
solve.
I wanted to use the same system like I did before by adding a rear fork of a
bike in front of the front fork, but ... I had to bend my legs a lot.The
bracket was not far enough. At first I wanted to place the seat more
backwards. But I didn't want to make the same mistake of a bad seat place
again. So I made the front fork longer by sliding a tube over the fork with
I did cut near the place of the axle of the wheel. I did the same with the
forward placed rear fork (do you still follow with rear and front????). OK
now the distance is OK, but I cannot place the wheel properly due to bad
access to the gear on the wheel. I need to deform the front by bending the
tubes OUTWARDS. Inwards would not be a problem. But how the f**k do you bend
them outwards? I am thinking but cannot find a solution. Anybody a idea?
Keep that brain spawning wings,
Koen
============================================================
This is the Python Mailinglist at freelists.org
Listmaster: Jürgen Mages jmages@xxxxxx
To unsubscribe send an empty mail to
python-request@xxxxxxxxxxxxx
with 'unsubscribe' in the subject field.
============================================================
Other related posts: