Hi, Since a few weeks, the stokid python has a stand: https://picasaweb.google.com/lh/photo/7WD_KF-K2ejw_OYbDtCeydMTjNZETYmyPJy0liipFm0?feat=directlink https://picasaweb.google.com/lh/photo/Zpanp45fGvRkMyz-tWJScNMTjNZETYmyPJy0liipFm0?feat=directlink The stand is lightweight (10mmx1mm thickness) but still very stable. To put the python on the stand I swivel it forward and it locks the front part at the same time. To ride it swivels bckward against the bottom of the frame. I thought I needed some securing mechanism, but the friction made the pivot-bolt is enough to keep the stand up. The stand is a big win for the python (especially when the bike is as long as this one), and it is now difficult imagining the python without it. Never I need to look for long free streches of walls to park the bike, or I can easily work on the front part. The width on the ground is about 17cms and this is wide enough to sit securely on the bike, or load groceries asymmetrically without the bike tipping over. I had hoped that I could start the bike while in stand: put my feet on the pedals and push the bike off with my hands on the ground. It would have been so cool, but unfortunately that doesn't work: The point where the stand sits on the ground is too much forward and there is simply too much lift on the bike necessary to get the stand up again. It looks like the winter is going to be soft, so I hope I will be able to ride it daily with my son through the whole season! Dirk ============================================================ This is the Python Mailinglist //www.freelists.org/list/python Listmaster: Jurgen Mages jmages@xxxxxx To unsubscribe send an empty mail to python-request@xxxxxxxxxxxxx with 'unsubscribe' in the subject field. ============================================================